Alcatel Onetouch Pop D5 5038A MT6582 Tested Firmware / Stock Rom

Alcatel Onetouch Pop D5 5038A MT6582 Firmware

This firmware is exclusively for Alcatel Onetouch Pop D5 5038A Single Sim. with mediatek chip MT6582. Choosing a right firmware for this phone is a must. this model of phone has two type, a single sim and dual sim. if you flash with wrong firmware may cause deadboot. this firmware is tested by me.

Check your phone at back, it should be like this;
Alcatel Onetouch Pop D5 5038A Single simAlcatel Onetouch Pop D5 5038A Single sim

Download Pop D5 5038A Firmware / Stock Rom. Pasword: 13freakpopd55038a

How to flash Alcatel Onetouch Pop D5 5038A MT6582  Single Sim

How to flash Android phone using SP Flash tool

What we need?
  • PC
  • Firmware/ROM, SP Flashtool and MTK Drivers
  • USB Cable
  • Smartphone with 30 to 50 percent battery charged

Driver Installation

Flashing phone need to install driver first in order to connect and to be able to flash firmware, we will be install MTK driver in to different way, choose only one by using Auto Installer Drivers or MediaTek USB VCOM drivers. 

Install Driver using Auto Installer Driver

  • After you download and extract, open the folder and you will see Install.bat 
  • Run and it will appear Windows Security window
  • Click Install this driver software anyway 
  • It will appear many times and just click the same button. 
MTK Driver Auto Installation

Wait for CMD window to display Install complete that indicate that driver installation is successful.

Driver auto installer done

Install Driver Using MediaTek USB VCOM drivers

To manually install MediaTek USB VCOM drivers, you can follow this video:

Flashing Stock Rom in SP Flash tool

  1. Download Latest SP Flash tool here and extract to your desired location.
  2. Open the extracted file folder and run flash_tool.exe
  3. On Scatter-loading file, click the choose button to browse for the Android_Scatter.txt
    flash tool choose file
  4. Follow the screenshot below in choosing android scatter file.
    Note: The given screenshot scatter file is for Starmobile UP firmware with MT6582, this may different to your downloaded firmware depend on what model of your phone. this is just a guide on how to flash Mediatek smartphone.
    SP flash tool choose scatter
  5. After you select and load scatter file, either you see unchecked file, if you are not sure what you are doing, I suggest to Do not change anything. In below screenshot, the default CACHE and USRDATA is uncheck, if yours is checked, Just leave it default and do not unchecked.
    SP flash tool file loaded
  6. In your phone turn off first, or remove battery (if removable) because turn off is a must.
    In flash tool Select Download Only Then click Download button
    In your phone Press Volume up or Down or you can press them both Then insert USB Cable. If you see a Red Progress bar then the phone is detected.
    After you see detected proceed now to step 7.
    sp flash tool phone detect
    6.1 Some phone that has a Virus infected encounter this warning;
    PMT changed for the ROM; it must be downloaded. If you don't see this warning just proceed to step 7.
    to solve this, just follow the suggestion, Please Select "Format All + Download" Scene and try again the step 6.

    SP flash tool PMT changed for the ROM

    SP flash tool PMT changed for the ROM format all

    SP flash tool PMT changed for the ROM formatting

  7. You will see a yellow progress bar, that means it start downloading. Just put down your phone because it may take few minutes.
    WARNING: Do not unplug or disconnect during this operation.SP Flash tool Downloading
  8. And finally, it will popup a Download OK,  that means the flashing new firmware is successful.

    SP flash tool download ok

    Now that you flash your new firmware, restart your phone and you can now setup settings and install your desired application. if you encounter some problem, please comment and we will help you.
    NOTE: Starting up for the first time may took long.



After you flash new firmware and try to dial *#06# to check your IMEI you will see INVALID or null Just follow How to Fix/Solve Invalid IMEI in safest method.


  1. This comment has been removed by the author.

  2. I used this stock rom and I strictly follow the step but then my phone was already dead :( pls help me what to do...

    1. This firmware is strictly for 5038a, and must be single sim only. There are many type of Pop D5. I sorry for your phone and please send us more info about your phone and we will help you to fix it. relax its just a software problem. pm us at

  3. Yes.. my phone unit is alcatel one touch pop d5 5038a sir. but then my phone was dead. i follow the steps but nothing happens :(

  4. i already downloaded and installed the ROM in my phone. what will i put in the SIM ME lock?

    1. does this ROM remove the sim lock by the way?

  5. Flash tool won't detect my phone. Why is that?

  6. Hello i'm french,
    I need stock rom for POP D5 5038X-2CALFR1-1.
    any hope you got this firmware please?
    I flash with 5038d model, and it doesnt work

  7. Okay po ba to? Help nman biglang bootloop phone ko e Pop D5 single sim sya

  8. after flashing my cp my phone is not open T_T

    1. this firmware is strictly for Onetouch Pop D5 5038A MT6582, if your phone is different then it can cause deadboot

  9. Working po, legit po yung rom. Thanks! :D

  10. Hello po na flash ko po yung rom ng walang problema pero wala po syang signal pano po yan. Yan po ba yung invalid IMEI? TY

    1. Follow mo lang yung link ng tutorial kung pano fix yung IMEI

  11. sir,may stock rom po kayo pop d5 5038e dual sim.pahingi po,,

  12. Firmware for D5 OT-5038 Just posted it here

  13. Replies
    1. Please try select Format all + download in sp flash tool

  14. matagal ba tlga mag boot after flashing?

    1. yes po matagal talaga, Minsan need pa hard reset after flash