Some problems to be fixed:
- Hang
- Virus
- boot loop
- Too many pattern attempt (Alternative solution)
- deadboot but detected
- and more
If you experience those problems, then here is the solution.
Download CM Life Firmware (Flashtool included)
Download CM Life Firmware (Flashtool included)
How to flash Android phone using SP Flash tool
What we need?
- PC
- Firmware/ROM, SP Flashtool and MTK Drivers
- USB Cable
- Smartphone with 30 to 50 percent battery charged
Driver Installation
Install Driver using Auto Installer Driver
- After you download and extract, open the folder and you will see Install.bat
- Run and it will appear Windows Security window
- Click Install this driver software anyway
- It will appear many times and just click the same button.
Install Driver Using MediaTek USB VCOM drivers
Flashing Stock Rom in SP Flash tool
- Download Latest SP Flash tool here and extract to your desired location.
- Open the extracted file folder and run flash_tool.exe
- On Scatter-loading file, click the choose button to browse for the Android_Scatter.txt
-
Follow the screenshot below in choosing android scatter file.
Note: The given screenshot scatter file is for Starmobile UP firmware with MT6582, this may different to your downloaded firmware depend on what model of your phone. this is just a guide on how to flash Mediatek smartphone.
-
After you select and load scatter file, either you see unchecked file, if you are not sure what you are doing, I suggest to Do not change anything. In below screenshot, the default CACHE and USRDATA is uncheck, if yours is checked, Just leave it default and do not unchecked.
-
In your phone turn off first, or remove battery (if removable) because turn off is a must.
In flash tool Select Download Only Then click Download button
In your phone Press Volume up or Down or you can press them both Then insert USB Cable. If you see a Red Progress bar then the phone is detected.
After you see detected proceed now to step 7. -
You will see a yellow progress bar, that means it start downloading. Just put down your phone because it may take few minutes.
-
And finally, it will popup a Download OK, that means the flashing new firmware is successful.
Now that you flash your new firmware, restart your phone and you can now setup settings and install your desired application. if you encounter some problem, please comment and we will help you.
NOTE: Starting up for the first time may took long.
PMT changed for the ROM; it must be downloaded. If you don’t see this warning just proceed to step 7.
to solve this, just follow the suggestion, Please Select “Format All + Download” Scene and try again the step 6.
Sir, it's says BROM ERROR. Ano pong gagawin ko dun ?
Sir, nag error naman sya ngayon.
sir hanggang boot loader lang sya
try to use other version of sp flashtool or select format all + download
sr how to download sp flashtool and also complete need for sp flashtool to use
Xolo rom po ba ito ? Pls answer? Need ko po ung sa cm life hindi sa xolo a500l
Orig stock rom to galing sa CM life mismo
Di na gumagana ung CM J2 Flare after reflashing using original firmware. haha. ayun di na reread ung usb when in charging. pero responsive ung volume down. hahaha jusko sakit sa ulo.
Relax bro, kalma lang software problem lang yan all you need is you and your computer, flash mo lang pag di na masakit ulo mo 🙂
im looking fimware for cherry mobile W5
sir bakit hindi ma read yung phone ko? na install ko naman lahat ng drivers manually