How to flash your Huawei Ascend Y600-U20
Download Huawei Ascend Y600-U20 Firmware / Stock Rom
How to flash Android phone using SP Flash tool
What we need?
- PC
- Firmware/ROM, SP Flashtool and MTK Drivers
- USB Cable
- Smartphone with 30 to 50 percent battery charged
Driver Installation
Install Driver using Auto Installer Driver
- After you download and extract, open the folder and you will see Install.bat
- Run and it will appear Windows Security window
- Click Install this driver software anyway
- It will appear many times and just click the same button.
Install Driver Using MediaTek USB VCOM drivers
Flashing Stock Rom in SP Flash tool
- Download Latest SP Flash tool here and extract to your desired location.
- Open the extracted file folder and run flash_tool.exe
- On Scatter-loading file, click the choose button to browse for the Android_Scatter.txt
-
Follow the screenshot below in choosing android scatter file.
Note: The given screenshot scatter file is for Starmobile UP firmware with MT6582, this may different to your downloaded firmware depend on what model of your phone. this is just a guide on how to flash Mediatek smartphone.
-
After you select and load scatter file, either you see unchecked file, if you are not sure what you are doing, I suggest to Do not change anything. In below screenshot, the default CACHE and USRDATA is uncheck, if yours is checked, Just leave it default and do not unchecked.
-
In your phone turn off first, or remove battery (if removable) because turn off is a must.
In flash tool Select Download Only Then click Download button
In your phone Press Volume up or Down or you can press them both Then insert USB Cable. If you see a Red Progress bar then the phone is detected.
After you see detected proceed now to step 7. -
You will see a yellow progress bar, that means it start downloading. Just put down your phone because it may take few minutes.
-
And finally, it will popup a Download OK, that means the flashing new firmware is successful.
Now that you flash your new firmware, restart your phone and you can now setup settings and install your desired application. if you encounter some problem, please comment and we will help you.
NOTE: Starting up for the first time may took long.
PMT changed for the ROM; it must be downloaded. If you don’t see this warning just proceed to step 7.
to solve this, just follow the suggestion, Please Select “Format All + Download” Scene and try again the step 6.
how long does it take to start up?
After you flash if you wait more than 5 minutes then you might need to hard reset.
thank you boss nag work siya…
WHERE IS THE DOWNLOAD LINK?
right there!! "Download Huawei Ascend Y600-U20 Firmware / Stock Rom"
boz i followed all the steps an it said "OK". but when i started my phone still stock on welcome logo.. what should i do boz?
Just hard reset after flash
i got black screen with only vibration after flashing it u know i cant fix it
try to flash again and select format all + download in sp flashtool settings, make sure also that your phone model is huawei ascend y600-u20
I got black screen after flashing.
I just update the link above, you can try that firmware
sir i cant see the download link
hehe nice one boss black screen at vibrate lang ayaw na din mag charge
same problem here, black screen at vibrate lng.. at bunos pa ayaw na mgcharge
haha dami naman at may bonus pa. Kung detected pa ang phone select mo format all + Download.
dead link na po .. pan hinge po new link thanks
working pa naman link ng firmware sir
open line ba to mga sir????
Yes sir
my phone y600-u20 become black screen and only vibrate, how to resolve my problem please?
pa update po ng link, salamat