Cherry Mobile FLARE J1 Mini Firmware Tested (Pac File)

Cherry Mobile FLARE J1 Mini firmware
For those looking for Cherry Mobile FLARE J1 Mini pac file, then here is the tested firmware for you. you can use research download to flash the firmware. this is android 5.1 lollipop firmware. SP7731


Download CM Flare J1 mini Firmware,

 password is mhedTAITING <==Thanks and credit. unpack using winrar or 7zip

Alternative link (Not tested)

There are common problem of android phone that can be fix through flashing new firmware, and remember that flashing can only fixed software problem, this firmware is tested and here are the following software problem that can be fix in flashing new firmware:


  • Infected Virus - Also known as Monkey Virus where when you connect to Internet, there is automatically download apps or some popup screen and sometimes automatically turn on WiFi or data connection without doing it. The virus will not remove though hard reset or formatting your phone. Installing new firmware is the best solution.
  • Unfortunately Error - This is when you open some apps it will popup Unfortunately, App has stopped. If cannot fixed through clearing the data, then flashing new firmware is also the solution.
  • Stuck or Hang in Logo - The reason for this is either when you install incorrect Rom. Try to hard reset first but if still stuck, then flashing firmware is also the solution
  • Too Many Pattern Attempts or forgot password -   This is just an alternative solution if you cannot hard reset your android phone.
Note that flashing new firmware can deleted all your personal data in your internal storage, Including Photos, Contacts, Messages and all Installed third party application, We recommend to perform back up first your important data before proceeding. Download the firmware and follow the flashing instruction below.


Flashing Stock Rom To Android Smartphone

Install Spreadtrum Driver

  1. First download SPD SCI Android USB Driver V4 by jungo the complete driver for Spreadtrum.
  2. After download, extract anywhere  in your computer, Open extracted SCI-android-usb-driver-jungo-v4 folder then select system type if 32-bit or 64-bit.
    - To know your system type, go to control panel click on System and Security then click System. or simply right click on Computer and click Properties. you will see like this. mine is 32 bit (also known as x86-bit).
    System Type 32-bit operating system
  3. Then run DPInst.exe. Just click next until it finish installing.
    SCI-android-usb-driver-jungo-v4 driver
NOTE: Before proceeding, make sure that your android smartphone should have atleast 30 to 50 percent of battery to perform flashing.

Flash Pac file Stock Rom

  1.  Download the SPD_Upgrade_Tool_R4.0.0001 latest version, or SPD_Upgrade_Tool_R299015 lower version. Then extract to your desired location.
  2. Open your extracted files and run ResearchDownload.exe, For lower version open Bin folder and run UpgradeDownload.exe.
    NOTE:
    UpgradeDownload and ResearchDownload is the same, UpgradeDownload is just the name of the lower version but they are both SPD Upgrade tool.
    UpgradeDownload.exe
  3. In this instruction I will use UpgradeDownload and a Use Cherry Mobile Pac file as a sample. In UpgradeDownload window, click on single gear icon to Load Packet and browse for pac file(firmware/stock rom) you downloaded then click open. follow this screenshot.
    UpgradeDownload Load Packet
  4. Loading a pac file may took long depend on file size. After loading a pac file, now ready to start flashing, You can also click on Settings on two gear icon if you want to unchecked some part of firmware like EraseRuntimeNV, This will not work on lower version. I recommend that leave it unchanged if you don't have any idea.
    UpgradeDownload Start Downloading
  5.  Turn off first your phone, remove battery (if removable) then bring it back. In ResearchDownload/UpgradeDownload Click on Start Downloading, then in your phone press Volume up and Volume down then connect USB cable. If you see a a progress bar, then it means that it is successfully connected. if not, then try step 5 again.
    UpgradeDownload start
  6. Wait until you see a Passed in progress, that means, you installed a new stock rom successfully.
After you flash the firmware, you can now turn on your phone, take note that first time start up may took long. but if it tooks more than 15 minutes then I suggest to perform a hard reset.

46 comments:

  1. boss rineflash ko sya, bakit hanggang download system lang cya nag i istuck? ayaw mag proceed ng progress bar.

    ReplyDelete
    Replies
    1. master ni root kopo yung flare j1 mini tapos nung nag reboot tapos pinindot ko yung file manager nawala lahat ng files pate folder nawala tas pag nagcreate ako ng file ayaw error tyaka pag na internet ako ayaw may protocol na failed pag flash ba ng stoc rom ang makakayos dito sir??

      Delete
    2. Hindi ko masasabi kung sa stock rom yan pero ang best na gawin mo is subukan mo munang i flash ang stock rom na to.

      Delete
  2. boss pano tanggalin yung welcome pag na hardreset na nagtatanong kc ng ewarranty.

    ReplyDelete
    Replies
    1. Next mo lang then back back back gang mag close.
      PS: Not a Boss, Master :D

      Delete
  3. John Chaelvin De LunaNovember 27, 2016 at 4:10 PM

    Thanks you so very much! This Works My GOd! :D

    ReplyDelete
  4. naisagawa ko nmn po ng maayos to master bakit ung virus andun pa din
    ung Aging Test na app po tpos talaga bang naka root agad ng king root to??

    stock rom po ba talaga ito

    ReplyDelete
  5. mga boss pa upload ulit file really need it plsss]

    ReplyDelete
  6. hindi ko ma extract master corrupt file or wrong password lumalabas

    ReplyDelete
  7. hindi ko ma extract master corrupt file or wrong password lumalabas

    ReplyDelete
    Replies
    1. meron parin pong password master sa 7zip paano po ito?

      Delete
  8. Master, may idea po ba kayo kung paano mag step sa email verification "this device was reset to continue sign in with a google account" na flash ko na po.. meron pa po bang ibang way para ma ayos to? thanks

    ReplyDelete
    Replies
    1. Ang tawag jan is FRP lock, follow this instruction para ma bypass ang frp ng flare j1 mini mo http://gsmsolutionph.blogspot.com/2016/11/cherry-mobile-flare-j1-mini-frp-bypass.html

      Delete
  9. Boss, pag pinipindot ko na ung arrow.. sinsabeng Incompatible Partition daw... d ko tuloy ma flash... pa help po.. TIA

    ReplyDelete
  10. wrong pss lumalabas

    ReplyDelete
    Replies
    1. manually type password or use 7zip to extract

      Delete
  11. boss ayaw paden po...
    mapa manual or copy paste
    kahit naka 7zip or winrar

    ReplyDelete
    Replies
    1. Boss pwede naman bot 7zip and winrar, dinownload ko pa ulit para ma test. pero sige nag lagay nalang ako alternative

      Delete
  12. pa update nalang sir

    ReplyDelete
    Replies
    1. Theres no need to update sir, Still working fine

      Delete
  13. master bkit kpag nagload packet na sa reasearch download biglang lilitaw ung 'pac file may be damaged' tapos load packet failed na.. pahelp po plss

    ReplyDelete
  14. Replies
    1. try mo mag extract sa android tapos download mo ung 7zip.. yan ginawa ko

      Delete
    2. tama 7zip lang gamitin mga brad :)

      Delete
  15. Bakit po hindi ma install ang device driver ng x64 bit? ang nagkalagay po errors po lahat ng installation ng softwares?
    64-bit os namin.. ano po ang gagawin po Master Vir?

    ReplyDelete
    Replies
    1. try mo right click then run as admin, kung ayaw, paki try nalang sa ibang os bro :)

      Delete
  16. master ayaw mag start ng download

    ReplyDelete
  17. master hindi po lumabas ang progress bar gamit kong pc is windows 10

    ReplyDelete
  18. SA Driver lang ang may problema nyan, wala kasi ako makitang tested na driver sa windows 10 eh

    ReplyDelete
  19. boss panu po mawala yung safemode??

    ReplyDelete
    Replies
    1. Restart mo lang, or boot mo sa recovery then normal boot mo or hard reset mo

      Delete
    2. ganun parin master.. panu po ma fix ung twrp sa tuwing pumnta ako sa twrp bigla po syang magwhite screen tas iba iba ung color!! panu po yan master??

      Delete
  20. boss paano po kapag ayaw lumitaw sa list yung cellphone ko ayaw mag flash e ? salamat

    ReplyDelete
  21. master panu maalis yung mga apps na lumalabas ditto?

    ReplyDelete
  22. boss paano pag di nareread yung phone ?

    ReplyDelete
  23. Boss pnu po b ung sa step 5 di ko makuha ng tama sakit n ng daliri ko kakapindot pls po pkituruan po aq...thankyou

    ReplyDelete
    Replies
    1. Una dapat installed ang driver, then off phone>Click start sa researchDownload>press volume> connect usb> then pag nadetect, release mo na volume. at antaying matapos mag flash

      Delete
  24. Pwede ba e Flash Sa Cp to Boss

    ReplyDelete
    Replies
    1. nope, pang pc lang talaga tong firmware na to eh

      Delete