Cherry Mobile FLARE J1 Mini Firmware Tested (Pac File)

Cherry Mobile FLARE J1 Mini firmware

For those looking for Cherry Mobile FLARE J1 Mini pac file, then here is the tested firmware for you. you can use research download to flash the firmware. this is android 5.1 lollipop firmware. SP7731

Download CM Flare J1 mini Firmware,

 password is mhedTAITING <==Thanks and credit. unpack using winrar or 7zip

Alternative link (Not tested)

There are common problem of android phone that can be fix through flashing new firmware, and remember that flashing can only fixed software problem, this firmware is tested and here are the following software problem that can be fix in flashing new firmware:

  • Infected Virus – Also known as Monkey Virus where when you connect to Internet, there is automatically download apps or some popup screen and sometimes automatically turn on WiFi or data connection without doing it. The virus will not remove though hard reset or formatting your phone. Installing new firmware is the best solution.
  • Unfortunately Error – This is when you open some apps it will popup Unfortunately, App has stopped. If cannot fixed through clearing the data, then flashing new firmware is also the solution.
  • Stuck or Hang in Logo – The reason for this is either when you install incorrect Rom. Try to hard reset first but if still stuck, then flashing firmware is also the solution
  • Too Many Pattern Attempts or forgot password –   This is just an alternative solution if you cannot hard reset your android phone.

Note that flashing new firmware can deleted all your personal data in your internal storage, Including Photos, Contacts, Messages and all Installed third party application, We recommend to perform back up first your important data before proceeding. Download the firmware and follow the flashing instruction below.


Flashing Stock Rom To Android Smartphone

Install Spreadtrum Driver

  1. First download SPD SCI Android USB Driver V4 by jungo the complete driver for Spreadtrum.
  2. After download, extract anywhere  in your computer, Open extracted SCI-android-usb-driver-jungo-v4 folder then select system type if 32-bit or 64-bit.
    – To know your system type, go to control panel click on System and Security then click System. or simply right click on Computer and click Properties. you will see like this. mine is 32 bit (also known as x86-bit).
    System Type 32-bit operating system
  3. Then run DPInst.exe. Just click next until it finish installing.
    SCI-android-usb-driver-jungo-v4 driver
NOTE: Before proceeding, make sure that your android smartphone should have atleast 30 to 50 percent of battery to perform flashing.

Flash Pac file Stock Rom

  1.  Download the SPD_Upgrade_Tool_R4.0.0001 latest version, or SPD_Upgrade_Tool_R299015 lower version. Then extract to your desired location.
  2. Open your extracted files and run ResearchDownload.exe, For lower version open Bin folder and run UpgradeDownload.exe.
    NOTE:
    UpgradeDownload and ResearchDownload is the same, UpgradeDownload is just the name of the lower version but they are both SPD Upgrade tool.
    UpgradeDownload.exe
  3. In this instruction I will use UpgradeDownload and a Use Cherry Mobile Pac file as a sample. In UpgradeDownload window, click on single gear icon to Load Packet and browse for pac file(firmware/stock rom) you downloaded then click open. follow this screenshot.
    UpgradeDownload Load Packet

  4. Loading a pac file may took long depend on file size. After loading a pac file, now ready to start flashing, You can also click on Settings on two gear icon if you want to unchecked some part of firmware like EraseRuntimeNV, This will not work on lower version. I recommend that leave it unchanged if you don’t have any idea.
    UpgradeDownload Start Downloading
  5.  Turn off first your phone, remove battery (if removable) then bring it back. In ResearchDownload/UpgradeDownload Click on Start Downloading, then in your phone press Volume up and Volume down then connect USB cable. If you see a a progress bar, then it means that it is successfully connected. if not, then try step 5 again.
    UpgradeDownload start

  6. Wait until you see a Passed in progress, that means, you installed a new stock rom successfully.
After you flash the firmware, you can now turn on your phone, take note that first time start up may took long. but if it tooks more than 15 minutes then I suggest to perform a hard reset.

50 thoughts on “Cherry Mobile FLARE J1 Mini Firmware Tested (Pac File)”

  1. naisagawa ko nmn po ng maayos to master bakit ung virus andun pa din
    ung Aging Test na app po tpos talaga bang naka root agad ng king root to??

    stock rom po ba talaga ito

  2. master ni root kopo yung flare j1 mini tapos nung nag reboot tapos pinindot ko yung file manager nawala lahat ng files pate folder nawala tas pag nagcreate ako ng file ayaw error tyaka pag na internet ako ayaw may protocol na failed pag flash ba ng stoc rom ang makakayos dito sir??

  3. Master, may idea po ba kayo kung paano mag step sa email verification "this device was reset to continue sign in with a google account" na flash ko na po.. meron pa po bang ibang way para ma ayos to? thanks

  4. master bkit kpag nagload packet na sa reasearch download biglang lilitaw ung 'pac file may be damaged' tapos load packet failed na.. pahelp po plss

  5. Bakit po hindi ma install ang device driver ng x64 bit? ang nagkalagay po errors po lahat ng installation ng softwares?
    64-bit os namin.. ano po ang gagawin po Master Vir?

  6. ganun parin master.. panu po ma fix ung twrp sa tuwing pumnta ako sa twrp bigla po syang magwhite screen tas iba iba ung color!! panu po yan master??

  7. Una dapat installed ang driver, then off phone>Click start sa researchDownload>press volume> connect usb> then pag nadetect, release mo na volume. at antaying matapos mag flash

  8. kht po pag kinonek ko lang sa pc nagcconnect nman pero mga 15 to 20 sec bgla nlang nagddisconnect sa pc ung phone
    patulong nma mga master.. thanks

Comments are closed.