Cherry Mobile Flare Lite 2S Firmware/Stock Rom

Cherry Mobile Flare lite 2S
Cherry Mobile Flare lite 2S Android 5.1 Lollipop
The new Cherry Mobile Flare lite 2S V2 Stock Rom is here! with Android 5.1 Lollipop and Spreadtrum SC7731 Chipset that can be flash through SPD Upgrade tool for free. This firmware PAC File and tested using UpgradeDownload. Download firmware below and follow the Instruction.
Remember that Cherry Mobile Flare lite 2S is different to Cherry Mobile Flare lite 2, Flare lite 2 is Android 4.4 KitKat while Flare lite 2S is Android 5.1 Lollipop, Don't try to flash below firmware to Flare lite 2, Below firmware is strictly for Cherry Mobile Flare lite 2S only.

Flashing this firmware can fixed the following problem;
  • Cherry Mobile Flare lite 2S Infected Virurs - This is the common problem in all android phone, this is also called Monkey test virus where there is some popup window in your phone and sometimes there are application that automatically download and install without knowing it. to solved that, flashing is the solution, you cannot remove it through hard reset because it is already infected the system.
  • Cherry Mobile Flare lite 2S Hang or stuck in logo
  • Cherry Mobile Flare lite 2S bootloop
  • Cherry Mobile Flare lite 2S Slow or lag
  • Cherry Mobile Flare lite 2S Unfortunately error
Or some other reason, now before flashing, take note that all your data in phone storage will be delete including contacts, message, photos in internal storage and all installed third party application, we recommend to backup first all your important data before proceeding. Flashing this stock rom can also remove FRP lock or google account.

Download Cherry Mobile Flare lite 2S Firmware

Password: CMFLARELITE2SV2BYMARLO123
Special thanks and credit to ==> MARLO123 


Flashing Stock Rom To Android Smartphone

Install Spreadtrum Driver

  1. First download SPD SCI Android USB Driver V4 by jungo the complete driver for Spreadtrum.
  2. After download, extract anywhere  in your computer, then select system type if 32-bit or 64-bit.
    - To know your system type, go to control panel click on System and Security then click System. or simply right click on Computer and click Properties. you will see like this. mine is 32 bit (also known as x86-bit).
    System Type 32-bit operating system
  3. After you knew your system type, open your extracted SCI-android-usb-driver-jungo-v4 folder, then choose a folder weather it is x86(32) or x64, then run DPInst.exe. Just click next until it finish installing.
    SCI-android-usb-driver-jungo-v4 driver
NOTE: Before proceeding, make sure that your android smartphone should have atleast 30 to 50 percent of battery to perform flashing.

Flash Pac file Stock Rom

  1.  Download the SPD_Upgrade_Tool_R4.0.0001 latest version, or SPD_Upgrade_Tool_R299015 lower version. Then extract to your desired location.
  2. Open your extracted files and run ResearchDownload.exe, For lower version open Bin folder and run UpgradeDownload.exe.
    NOTE:
    UpgradeDownload and ResearchDownload is the same, UpgradeDownload is just the name of the lower version but they are both SPD Upgrade tool.
    UpgradeDownload.exe
  3. In this instruction I will use UpgradeDownload and a Use Cherry Mobile Pac file as a sample. In UpgradeDownload window, click on single gear icon to Load Packet and browse for pac file(firmware/stock rom) you downloaded then click open. follow this screenshot.
    UpgradeDownload Load Packet
  4. Loading a pac file may took long depend on file size. After loading a pac file, now ready to start flashing, You can also click on Settings on two gear icon if you want to unchecked some part of firmware like EraseRuntimeNV, This will not work on lower version. I recommend that leave it unchanged if you don't have any idea.
    UpgradeDownload Start Downloading
  5.  Turn off first your phone, remove battery (if removable) then bring it back. In ResearchDownload/UpgradeDownload Click on Start Downloading, then in your phone press Volume up and Volume down then connect USB cable. If you see a a progress bar, then it means that it is successfully connected. if not, then try step 5 again.
    UpgradeDownload start
  6. Wait until you see a Passed in progress, that means, you installed a new stock rom successfully.
After you flash the firmware, you can now turn on your phone, take note that first time start up may took long. but if it tooks more than 15 minutes then I suggest to perform a hard reset.


How to Bypass Cherry Mobile Flare Lite 2s FRP (Google Account)

You can follow tho above firmware flashing, if you encounter an frp lock, then lets flash it again and here are some few tricks in ReasearchDownload.
  1. In ResearchDownload Click on Settings, Select Flash Operations tab.
  2. In Erase Flash, Check Erase All Flash then click ok.
  3. Now click Start Downloading.
  4. Turn off your phone and press Volume Up the Insert USB Cable to PC.
  5. Now wait till finish downloading and you will see Passed.
cherry mobile Flare s5 mini frp bypass

if you have more question in bypassing frp lock for your CM Flare lite 2s, you can mesages us @ http://facebook.com/gsmsolutionph for urgent answer.

15 comments:

  1. It say usb driver not recognized...pls help me !!!

    ReplyDelete
    Replies
    1. Your driver is not installed properly, Try to Install Drivers first.

      Delete
  2. tangina ang nag post nito,,,, mali ang password na bigay,,,,, wag nyu e download masasayang time nyu,,,,,bweset talaga

    ReplyDelete
  3. it helps me alot in resetting, the problem is the FRP(factory reset protection), do you have solutions for this?

    ReplyDelete
    Replies
    1. I just updated the post on how to bypass Cherry Mobile Flare lite 2s FRP

      Delete
  4. sinon naka try nito kung tested feedback naman jan//?

    ReplyDelete
  5. hindi gumana sa akin.

    ReplyDelete
  6. sir this compatible with flare lite 2s no version indicated?

    ReplyDelete
  7. mali nmn po yung password. phingi nmn mga boss

    ReplyDelete
  8. OK NA mga boss, wla na pala yung letter u sa marlo.salamat ng marami

    ReplyDelete
  9. Salamat po ... It really saves my day.

    ReplyDelete