Cherry Mobile Flare X V2 V3 Firmware / Stock Rom

Cherry Mobile Flare X Firmware
Cherry Mobile Flare X V3
Hi, here is the update firmware for Cherry Mobile Flare X V3 Android 5.1 Lollipop Operating system. this is Mediatek chipset MT6735 that can be flash through SP Flashtool.
Take note that there is a three different version of Cherry Mobile Flare X make sure to check first your right version, Check your phone model to know what version by opening your phone and remove the battery, there you can see the device model.
  • Cherry Mobile Flare X (no version) - This is the first release Flare X which is the device model is X360 and the device CPU is a MT6752 Mediatek chipset also, it has also a Android 4.4 KitKat Operating System (with Lollipop Update), if this is your phone and you are planning to update in Lollipop just connect to internet and go to settings and there you can see Software Update. DO NOT try to update by flashing other Flare X  firmware version.
  • Cherry Mobile Flare X V2 - This is a higher specification than the previous flare x, this has Android 5.1 Lollipop and now in MT6753 with octa core processor.
  • Cherry Mobile Flare X V3 - This is the last version so far for Flare X Series, this has also a Android 5.1 lollipop firmware and it has MT6735 MediaTek Chipset, different from the previous.
Download the right firmware for your device

Download Cherry Mobile Flare X firmware (No Version) 

Download Cherry Mobile Flare X V2 firmware

Firmware password: rex@greenhills#gsmsandwich10.0
 Thanks and credit to Rex

Download Cherry Mobile Flare X V3 firmware 

Before flashing new firmware take note that all your personal data will be deleted including sms, contacts, photos that are saved in internal storage, we recommend to back up first before flashing, follow the instruction below.


How to flash Android phone using SP Flash tool

What we need?
  • PC
  • Firmware/ROM, SP Flashtool and MTK Drivers
  • USB Cable
  • Smartphone with 30 to 50 percent battery charged


Driver Installation

Flashing phone need to install driver first in order to connect and to be able to flash firmware, we will be install MTK driver in to different way, choose only one by using Auto Installer Drivers or MediaTek USB VCOM drivers. 

Install Driver using Auto Installer Driver

  • After you download and extract, open the folder and you will see Install.bat 
  • Run and it will appear Windows Security window
  • Click Install this driver software anyway 
  • It will appear many times and just click the same button. 
MTK Driver Auto Installation

Wait for CMD window to display Install complete that indicate that driver installation is successful.

Driver auto installer done


Install Driver Using MediaTek USB VCOM drivers

To manually install MediaTek USB VCOM drivers, you can follow this video:



Flashing Stock Rom in SP Flash tool

  1. Download Latest SP Flash tool here and extract to your desired location.
  2. Open the extracted file folder and run flash_tool.exe
  3. On Scatter-loading file, click the choose button to browse for the Android_Scatter.txt
    flash tool choose file
  4. Follow the screenshot below in choosing android scatter file.
    Note: The given screenshot scatter file is for Starmobile UP firmware with MT6582, this may different to your downloaded firmware depend on what model of your phone. this is just a guide on how to flash Mediatek smartphone.
    SP flash tool choose scatter
  5. After you select and load scatter file, either you see unchecked file, if you are not sure what you are doing, I suggest to Do not change anything. In below screenshot, the default CACHE and USRDATA is uncheck, if yours is checked, Just leave it default and do not unchecked.
    SP flash tool file loaded

  6. In your phone turn off first, or remove battery (if removable) because turn off is a must.
    In flash tool Select Download Only Then click Download button
    In your phone Press Volume up or Down or you can press them both Then insert USB Cable. If you see a Red Progress bar then the phone is detected.
    After you see detected proceed now to step 7.
    sp flash tool phone detect
    6.1 Some phone that has a Virus infected encounter this warning;
    PMT changed for the ROM; it must be downloaded. If you don't see this warning just proceed to step 7.
    to solve this, just follow the suggestion, Please Select "Format All + Download" Scene and try again the step 6.

    SP flash tool PMT changed for the ROM

    SP flash tool PMT changed for the ROM format all


    SP flash tool PMT changed for the ROM formatting


  7. You will see a yellow progress bar, that means it start downloading. Just put down your phone because it may take few minutes.
    WARNING: Do not unplug or disconnect during this operation.SP Flash tool Downloading
  8. And finally, it will popup a Download OK,  that means the flashing new firmware is successful.

    SP flash tool download ok

    Now that you flash your new firmware, restart your phone and you can now setup settings and install your desired application. if you encounter some problem, please comment and we will help you.
    NOTE: Starting up for the first time may took long.

Troubleshooting

FOR INVALID IMEI or Null IMEI

After you flash new firmware and try to dial *#06# to check your IMEI you will see INVALID or null Just follow How to Fix/Solve Invalid IMEI in safest method.

12 comments:

  1. Waiting for marshmallow for my cherry flare x

    ReplyDelete
  2. after ko naflash,d na po nagbukas,, sucessful namn.. bootloop lang ako tapos ngayon ayw na bumukas,,help po

    ReplyDelete
    Replies
    1. baka wrong firmware bro, tingnan mo sa likod nya, may specific version yan, baka maling version nadownload mo

      Delete
    2. Same rin sakin same version namam na download ko at sinunod naman lahat ng steps pero ayaw na mag on nang phone. Pa help naman.

      Delete
  3. Can't download the "Cherry Mobile Flare X V3 firmware" please help,

    ReplyDelete
    Replies
    1. The link is still available. Search from youtube on how to download from 4shared

      Delete