Oplus O+ Grande Firmware/Stock Rom MT6582 KitKat

 O+ Grande 4.4 KitKat
Oplus O+ Grande 4.4 KitKat
Hi, You might one for those looking for O+ Grande Firmware, Here it is, O+ Grande Firmware with default Operating version Android 4.4.2 KitKat and with Mediatek MT6582 Chipset that can be flash trhough a free flash tool like Smartphone Flash tool. Download firmware below.
Since this is Android phone, we encounter some common problem and here is some of the possible problem that can be solve through flashing this firmware;

  • O+ Grande infected virus - this is the most common where there is some automatically download apps without doing anything, this is also known as Monkey Virus, You can't remove it through Hard reset or formatting data. the first best solution is to flash new firmware

  • O+ Grande Unfortunately error -  This is related sometimes to infected virus where when you open some application, it will popup Unfortunately, xx has stopped, this problem need to flash again new firmware.
  • O+ Grande Bootloop 
  • O+ Grande Hang on logo
  • O+ Grande Deadboot

Download Oplus O+ Grande Firmware


Please note that flashing new firmware can delete all your data in internal storage like Messages, Contacts, Photos, and Installed third part application, we recommend to back up first your important data before continue. to flash this using a SP flashtool, follow the instruction below.


How to flash Android phone using SP Flash tool

What we need?
  • PC
  • Firmware/ROM, SP Flashtool and MTK Drivers
  • USB Cable
  • Smartphone with 30 to 50 percent battery charged


Driver Installation

Flashing phone need to install driver first in order to connect and to be able to flash firmware, we will be install MTK driver in to different way, choose only one by using Auto Installer Drivers or MediaTek USB VCOM drivers. 

Install Driver using Auto Installer Driver

  • After you download and extract, open the folder and you will see Install.bat 
  • Run and it will appear Windows Security window
  • Click Install this driver software anyway 
  • It will appear many times and just click the same button. 
MTK Driver Auto Installation

Wait for CMD window to display Install complete that indicate that driver installation is successful.

Driver auto installer done


Install Driver Using MediaTek USB VCOM drivers

To manually install MediaTek USB VCOM drivers, you can follow this video:



Flashing Stock Rom in SP Flash tool

  1. Download Latest SP Flash tool here and extract to your desired location.
  2. Open the extracted file folder and run flash_tool.exe
  3. On Scatter-loading file, click the choose button to browse for the Android_Scatter.txt
    flash tool choose file
  4. Follow the screenshot below in choosing android scatter file.
    Note: The given screenshot scatter file is for Starmobile UP firmware with MT6582, this may different to your downloaded firmware depend on what model of your phone. this is just a guide on how to flash Mediatek smartphone.
    SP flash tool choose scatter
  5. After you select and load scatter file, either you see unchecked file, if you are not sure what you are doing, I suggest to Do not change anything. In below screenshot, the default CACHE and USRDATA is uncheck, if yours is checked, Just leave it default and do not unchecked.
    SP flash tool file loaded

  6. In your phone turn off first, or remove battery (if removable) because turn off is a must.
    In flash tool Select Download Only Then click Download button
    In your phone Press Volume up or Down or you can press them both Then insert USB Cable. If you see a Red Progress bar then the phone is detected.
    After you see detected proceed now to step 7.
    sp flash tool phone detect
    6.1 Some phone that has a Virus infected encounter this warning;
    PMT changed for the ROM; it must be downloaded. If you don't see this warning just proceed to step 7.
    to solve this, just follow the suggestion, Please Select "Format All + Download" Scene and try again the step 6.

    SP flash tool PMT changed for the ROM

    SP flash tool PMT changed for the ROM format all


    SP flash tool PMT changed for the ROM formatting


  7. You will see a yellow progress bar, that means it start downloading. Just put down your phone because it may take few minutes.
    WARNING: Do not unplug or disconnect during this operation.SP Flash tool Downloading
  8. And finally, it will popup a Download OK,  that means the flashing new firmware is successful.

    SP flash tool download ok

    Now that you flash your new firmware, restart your phone and you can now setup settings and install your desired application. if you encounter some problem, please comment and we will help you.
    NOTE: Starting up for the first time may took long.

Troubleshooting

FOR INVALID IMEI or Null IMEI

After you flash new firmware and try to dial *#06# to check your IMEI you will see INVALID or null Just follow How to Fix/Solve Invalid IMEI in safest method.

27 comments:

  1. hi, i already did the instructions, but my phone still goes back to its old self with the old apps. help pls.

    ReplyDelete
    Replies
    1. Try to hard reset after you flash the firmware :)

      Delete
  2. hi can you make a firmware for skyworth s71

    ReplyDelete
  3. cant download in 4shared. "Signature is invalid. Please, try again" pls update. i need the firmware tnx.

    ReplyDelete
    Replies
    1. I tried and its working, please try to log in or Try 4shared premium link generator or jdownloader

      Delete
  4. tnx Mster Vir. i tried the link now and already downloading. i hope i can fix my phone. thank you very much.

    ReplyDelete
    Replies
    1. Ok goodluck sir, we wait for your feedback, I hope it works :)

      Delete
  5. already done MasterVir. thank you very much for posting this. it took me a months to find this firmware. :D

    ReplyDelete
  6. what is the password to decrypt the firmware»? Thanks

    ReplyDelete
  7. Thank you for this, but my phone still won't open it is still on the O+ boot up screen (O+ logo with red background) i tried to hard reset the device but still stuck on the O+ logo with red background... please advise.

    ReplyDelete
    Replies
    1. it says it will take a long time for the phone to turn on. but mine was turned on for almost 12 hrs, phone resets and goes back to O+ logo with red background

      Delete
    2. sorry about that bro, please try to flash again the firmware and this time, select format all + Download

      Delete
  8. Master, tried to flash the firmware as you instructed but still the same, it goes back to the bootloop. any more advice you can give out?

    ReplyDelete
  9. hi admin after ive done this method my touch screen becomes unresponsive please help thank you so much..

    ReplyDelete
  10. how can i fix my o+ grande everytime i click my apps then dirrectly home even i dont touch the home button pls help

    ReplyDelete
  11. Hi i cant still fix my o plus grande after the flash my lcd is not calibrated anymore.. pls help..thanks a lot..

    ReplyDelete
  12. uy boss may problem ako sa interbal storage ng O+ grande .89 lang yung total space paano to aayusin ganito ba talaga to?

    ReplyDelete
  13. naka ilang hard reset na ko! ,o flash ulit tapos hard reset ,salamat ng advance boss!

    ReplyDelete
    Replies
    1. flash mo then select mo format all + Download sa sp flash tool tas after flash hard reset mo

      Delete
  14. Boss na try ko magroot before and app2sd kaso kumalat files ko kasi tinanggal ko ang sd card ko. Pwede ba to mabalik sa original? first time ko magroot kasi and gusto ko ibalik sa dati ang lahat.

    ReplyDelete
  15. sir. pano po kapag nagDRAM failed? aksidente ko po kasing nagalaw yung phone habang nagfflash. narecognize sya nung una kaso pagkatapos nun nagsimula nang magerror. Narerecognize naman yung driver.

    ReplyDelete
  16. Hi Vir, thank you very much...My O+ Grande is now accessible by doing below...

    flash mo then select mo format all + Download sa sp flash tool tas after flash hard reset mo

    ReplyDelete