Cherry Mobile FLARE J2 Firmware / Stock Rom Marshmallow

Here is a stock rom for your Cherry Mobile Flare J2 for Android 6.0 Marshmalllow Operating system. This firmware is a Scatter File and Mediatek MT6580 Chipset. Flash using SP Flash tool.
Cherry Mobile Flare J2
Cherry Mobile Flare J2 Marshmallow
Updating of flashing a new firmware can fix some software related problem, and here are the following common problem that can be fix through flashing;


  • Infected Virus - Also known as Monkey Virus where when you connect to Internet, there is automatically download apps or some popup screen and sometimes automatically turn on WiFi or data connection without doing it. The virus will not remove though hard reset or formatting your phone. Installing new firmware is the best solution.
  • Unfortunately Error - This is when you open some apps it will popup Unfortunately, App has stopped. If cannot fixed through clearing the data, then flashing new firmware is also the solution.
  • Stuck or Hang in Logo - The reason for this is either when you install incorrect Rom. Try to hard reset first but if still stuck, then flashing firmware is also the solution
  • Too Many Pattern Attempts or forgot password -   This is just an alternative solution if you cannot hard reset your android phone.


Download Cherry Mobile Flare J2 V2.0 Firmware
Alternative CM Flare J2 V2.0 Firmware (Password:1224)
Another Alternative CM Flare J2 V2.0 Firmware
Another TESTED CM Flare J2 V2.0 Firmware (Pass:CyberSlave1988@antgsm)
Thanks to CyberSlave

NOTE: The CM FLARE J2 V2.0 has a problem in fixing software problem like deadboot, the three above firmware has a tested feedback working and some are not, we share those 3 to try which firmware works on your device. If still failed, then maybe flashing is not the solution or consult your nearest trusted Technician.

Download Cherry Mobile Flare J2 Firmware (for no version / V1)
Password: gsmsandwich

Please take note that flashing this firmware to your phone can delete all your personal data in your phone storage like Contacts, Messages, Photos and all installed third party application, we recommend to perform a backup first before flashing.

To flash the firmware using SP Flashtool Follow the Instruction Below


How to flash Android phone using SP Flash tool

What we need?
  • PC
  • Firmware/ROM, SP Flashtool and MTK Drivers
  • USB Cable
  • Smartphone with 30 to 50 percent battery charged


Driver Installation

Flashing phone need to install driver first in order to connect and to be able to flash firmware, we will be install MTK driver in to different way, choose only one by using Auto Installer Drivers or MediaTek USB VCOM drivers. 

Install Driver using Auto Installer Driver



  • After you download and extract, open the folder and you will see Install.bat 
  • Run and it will appear Windows Security window
  • Click Install this driver software anyway 
  • It will appear many times and just click the same button. 
MTK Driver Auto Installation

Wait for CMD window to display Install complete that indicate that driver installation is successful.

Install Driver Using MediaTek USB VCOM drivers

To manually install MediaTek USB VCOM drivers, you can follow this video:



Flashing Stock Rom in SP Flash tool

  1. Download Latest SP Flash tool here and extract to your desired location.
  2. Open the extracted file folder and run flash_tool.exe
  3. On Scatter-loading file, click the choose button to browse for the Android_Scatter.txt
    flash tool choose file
  4. Follow the screenshot below in choosing android scatter file.
    Note: The given screenshot scatter file is for Starmobile UP firmware with MT6582, this may different to your downloaded firmware depend on what model of your phone. this is just a guide on how to flash Mediatek smartphone.
    SP flash tool choose scatter
  5. After you select and load scatter file, either you see unchecked file, if you are not sure what you are doing, I suggest to Do not change anything. In below screenshot, the default CACHE and USRDATA is uncheck, if yours is checked, Just leave it default and do not unchecked.

  6. In flash tool Select Download Only Then click Download button
    In your phone turn off first, or remove battery (if removable) because turn off is a must.
    Then Press Volume up or Down or you can press them both Then insert USB Cable. If you see a Red Progress bar then the phone is detected.
    if it continue to Yellow Progress bar then proceed to step 7.
    sp flash tool phone detect
    6.1 Some phone that has a Virus infected encounter this warning;
    PMT changed for the ROM; it must be downloaded. If you don't see this warning skip this and proceed to step 7.
    to solve this, just follow the suggestion, Please Select "Format All + Download" Scene and try again the step 6.

    SP flash tool PMT changed for the ROM
  7. You will see a yellow progress bar, that means it start downloading. Just put down your phone because it may take few minutes.
    WARNING: Do not unplug or disconnect during this operation.SP Flash tool Downloading
  8. And finally, it will popup a Download OK,  that means the flashing new firmware is successful.
    SP flash tool download ok
    For Video tutorial, you can Watch in YouTube.
    Now that you flash your new firmware, restart your phone and you can now setup settings and install your desired application. if you encounter some problem, please comment and we will help you.
    NOTE: Starting up for the first time may took long.

Troubleshooting

FOR INVALID IMEI or Null IMEI

After you flash new firmware and try to dial *#06# to check your IMEI you will see INVALID or null Just follow How to Fix/Solve Invalid IMEI in safest method.

65 comments:

  1. da didnt send response data to flash tool error. what should i do?

    ReplyDelete
  2. camera problem.. no rear camera and upside down view

    ReplyDelete
  3. my cm flare j2 still cannot be opened and still asking for the privacy protection password. how to remove it or how to unlock it??

    ReplyDelete
    Replies
    1. Flashing new firmware doesn't remove privacy protection password for your cherry mobile. try following this http://gsmsolutionph.blogspot.com/2016/11/remove-privacy-protection-password-lock.html

      Delete
  4. Showing only "Gadget Serial" instead of port

    ReplyDelete
    Replies
    1. Make sure you installed the driver, your phone also must turned off

      Delete
  5. Sir ma remove ba yung Privacy unlock pag e reflash ko ang flare j2??
    paki sagot nman @master Vir

    ReplyDelete
    Replies
    1. Good day bro, mawaala pag flash mo kung iseselect mo yung format all + download sa sp flash tool, pero hindi mo na kailangang gawin yun ang mas madaling paraan ay gayahin mo lang to. http://www.gsmsolutionph.com/2016/11/remove-privacy-protection-password-lock.html select mo lang ang MT6580

      Delete
  6. pag e flash ko sir hold On bottom mag punta sa boot mode tama nman pag ka install ng Driver

    ReplyDelete
  7. Sir nag OK naman po. Bakit po stock pa din sa bootlogo sya.

    ReplyDelete
    Replies
    1. medyo matagal lang mag boot sa una pero magboboot din yan, kung ganun padin paki hard reset lang gagana na yan

      Delete
  8. mareresolve kaya yung automatic on ng bluetooth at wifi nya?? kasi may friend ako na yung J2 nya kahit patayin yung bluetooth at wifi nag oon automatic

    ReplyDelete
  9. mareresolve kaya yung automatic on ng bluetooth at wifi nya?? kasi may friend ako na yung J2 nya kahit patayin yung bluetooth at wifi nag oon automatic

    ReplyDelete
    Replies
    1. Ou, may monkey virus kung ganun, reprogram/reflash ang best solution jan

      Delete
  10. Sir nadeadboot na po ata ako. Nareread pa ng pc pero di na nabubuhay. help po sir

    ReplyDelete
    Replies
    1. Make sure na tama yung version na naDownload mong firmware, kung deadboot, relax, flash lang yan ng tamang version.

      Delete
    2. sir pano magflash kapag deadboot?

      Delete
    3. Power off by removing battery, reinsert then Press volume then plug usb.

      Delete
    4. Sir Tulong namn deadboot po tama naman ang firmware eh panu po gagawin salamat po sanay ma asikaso agad

      Delete
  11. sir after i flash the new firmware it still deadboot. what should i do?

    ReplyDelete
    Replies
    1. still deadboot means hindi flashing ang solution nyan, baka may problema sa hardware.

      Delete
  12. usually ilang minuto na naka stuck sa logo nya after ng flashing? 15 mins na kasi 'yung akin stuck pa rin

    ReplyDelete
  13. need help yung cm flare j2 ko po nireformat ko na kaya lang lumilitaw prin yung unfortunately,google play store services has stopped. ano po gagawin ko?

    ReplyDelete
    Replies
    1. Kelangan ng iReprogram pag ganun brow, follow lang above instruction sa flashing.

      Delete
  14. Ginawa ko na po ung sa above instruction since deadboot po saken, at ayaw na mag on. Pero nadedetect pa ng Pc.

    Nung nagflash po ako eto lang lumabas:

    BROM ERROR: S_STORAGE_NOT_MATCH (3182)

    [HINT]:

    Ano po kayang problema?

    ReplyDelete
    Replies
    1. Relax bro hanap ka pa iba firmware, hindi lang compatible ang firmware, yung above firmware kasi is para sa flare j2 v2 only, pm us at facebook.com/gsmsolutionph if u need help

      Delete
    2. Master pahingi po ng link ng cm flare j2 not v2 please..

      Delete
  15. sir after po maflash to tapos ganun parin po stock parin sa logo meron po bang ibang paraan para maayus to? tnx...
    ]

    ReplyDelete
    Replies
    1. select mo yung format all + Download sa SP Flashtool tapos flash mo ulet then after flash, hard reset mo

      Delete
  16. sir ptulong nmn paano po ggwen ko sa cellphone nkaoff naman sya at gnwa ko volume uo and down kaso ayaw naman magred o madetect sa sp flash tool ano dpat ko gwin nkainstall nmn lahat ng driver nya

    ReplyDelete
  17. sir di po nagwork. deadboot na. pano po malalaman kung may iba pang problema like hardware?

    ReplyDelete
    Replies
    1. na try mo naba format all + download, saka dapat tama din firmware mo na naflash

      Delete
  18. Master patulong po pag flash ko gamit ang sptf successful ang download boss kaso ayaw na mag on ng phone ko.. Pag charge ko naman wala ng lumalabas na baterry.. Ano po gagawin dito....

    ReplyDelete
  19. Sir, ginawa ko instructions d2, nakumpleto ko lahat tapos ginamit ko ung firmware na nasa link, tapos sabagay format para mawala ung gmail account protection?.
    Pero nung binuksan ko andun pa rin ung gmail sign in..
    Panu po un? Salamat

    ReplyDelete
    Replies
    1. Naka FRP lock yan, log in mo lang yun unang na sign in na email. kung nakalimutan pwede mo itry eto para ma bypass http://www.gsmsolutionph.com/2017/08/cherry-mobile-flare-a3-bypass-frp.html

      Delete
  20. sir ok naman gumana naman ng maayos. ang problema e ung sa network may signal sya pero di makapag send ng message pero gumagana ung data, nagpalit na rin ako ng sim pero ganun parin. ano po kaya possible problem nito?

    ReplyDelete
    Replies
    1. Try mo nga check kung ok IMEI nya. dial mo lang *#06# kung unknown. yung yung problema na need mo ng nvram. kung meron naman try mo hard reset lang. message us for further problem at fb.me/gsmsolutionph

      Delete
  21. ask ko lang po nagawa ko po ung process. tapos nag progress naman sya tapos nung bubuhayin ko eeh. ayaw mabuhay. panu po un

    ReplyDelete
  22. sir. after ko gnawa ang procedure mo. naging success naman sya. kaso lng. after nun. nd na sya magopen. if iconnect ko sa pc. dalawa natetect nya. preloader at mediatek da usb port. taz on/off lng sya. pano to ayusin?

    ReplyDelete
    Replies
    1. make sure sir tamang version yung flash mo. tingnan mo sa likod ng cp mo yung model nya. baka na flash mo version 2 kung walang version yan or vice versa.

      Delete
  23. BROM ERROR : S_BROM_CMD_STARTCMD_FAIL (2005)
    [BROM] CAN NOT PASS BOOTROM START COMMAND! POSIBBLY TARGET POWER UP TO EARLY.

    ReplyDelete
  24. Sir pano po kapag windows 10 yung pc applicable parin ba na gamitin ay windows7.inf? Or yung installer ng drivers nalang ang gagamitin

    ReplyDelete
    Replies
    1. Kung may mahahanap ka sana na MTK driver for windows 10 pwede mo flash sa win10. yung given above kasi tested driver for win7 lang.

      Delete
  25. Hello sir before I flash the phone it is on bootloop. After I flashed it ayaw na po nya magon pero nareread pa po sya ng pc. What can I do sir?

    ReplyDelete
    Replies
    1. Hi mr Unknow, you just flashed the incorrect firmware, pero don't worry need lang yan ng tamang firmware, please capture the phone model at the back of your phone and SEND US TO OUR FACEBOOK PAGE

      Delete
  26. Master na deadbol CM j2 v2 hehe... pahelp nmn ayaw na mabuhay

    ReplyDelete
    Replies
    1. We give our best to help you guys in fixing this Flare j2 v2.0 deadboot, I already added another two alternative firmware. Please consider the note.

      Delete
  27. hello po ask lang po ko ano po ba compatible driver po sa SF tool 1620?paaano din po ba malalaman kung set up at gumagana po yung SF tool 1620. patulong naman po boss..

    ReplyDelete
  28. yung pobleme po kasi nag e stock logo po siya... patulong po kung papaano boss
    malalaman kung set up at gumagana po yung SF tool 1620.and compatible driver po sa SF tool 1620

    ReplyDelete
  29. paki pm nalang po ko sa gmail accout ko po o di po kaya dito..salamat po boss

    ReplyDelete
  30. hi tested napo bato?
    pede poba mag flash ng firmware sa j2 v2 without battry
    tinesting ko hanggang red lang 49 sec na kinakabahan ako
    kasi baka sumabog walang battery kasi e pero nadedetect naman ng pc kaso pag mag flash ng firmware e hanggang red lang ayaw mag ywllow d kpa natry sa j2 v2 na lagyan ng battery bago mag flash
    tsaka pede ba ang ibang battery? pansamantala lang pag gumana ang pag flash bibilan ko ng battery

    ReplyDelete
    Replies
    1. Tested po lahat yan pero Do it your own risk padin, Pwede mo lagyan kahit anong battery ng cellphone pansamantala. pwede din walang battery pero need mo check sa flash tool yung flash whithout battery.

      Delete
  31. success ang flashing deadboot after flashing same version po sila

    ReplyDelete
  32. SIr help po ok naman sya kaso ayaw ng magbukas kht logo ayaw na po

    ReplyDelete
  33. sir d q na po ma open after po q po na install ang bagon rom pano po to?

    ReplyDelete
    Replies
    1. pati po recovery di q na makita :( help po sana

      Delete
    2. try mo flash gamit ang firmware sa taas. baka incorrect firmware na flash mo.

      Delete
  34. sir patulong po mag brom error po 4032

    ReplyDelete
  35. sir patulong po
    may nalabas error brom 2005

    ReplyDelete