Cherry Mobile Flare J3 Plus Firmware / Stock Rom

Cherry Mobile Flare J3 Plus
Android 6.0 Marshmallow

Here is the firmware for your Cherry Mobile Flare J3 Plus with Android 6.0 Marshmallow Operating System. It has Mediatek Chipset that can be flash through SP Flash tool in Scatter file.

Download Cherry Mobile Flare J3 Plus Firmware
Firmware Password: firmwarefromgsmsolutionph

NOTE: Some encounter a black screen after flash, the solution included below.


Here are common problem of android phone that can be fix through flashing new firmware, and remember that flashing can only fixed software problem, this firmware is tested and here are the following software problem that can be fix in flashing new firmware:

  • Cherry Mobile Flare J3 Plus Infected Virus – Also known as Monkey Virus where when you connect to Internet, there is automatically download apps or some popup screen and sometimes automatically turn on WiFi or data connection without doing it. The virus will not remove though hard reset or formatting your phone. Installing new firmware is the best solution.
  • Cherry Mobile Flare J3 Plus Unfortunately Error – This is when you open some apps it will popup Unfortunately, App has stopped. If cannot fixed through clearing the data, then flashing new firmware is also the solution.
  • Cherry Mobile Flare J3 Plus Stuck or Hang in Logo – The reason for this is either when you install incorrect Rom. Try to hard reset first but if still stuck, then flashing firmware is also the solution
  • Cherry Mobile Flare J3 Plus Too Many Pattern Attempts or forgot password –   This is just an alternative solution if you cannot hard reset your android phone.
  • Cherry Mobile Flare J3 Plus boot loop.



How to flash Android phone using SP Flash tool

What we need?

  • PC
  • Firmware/ROM, SP Flashtool and MTK Drivers
  • USB Cable
  • Smartphone with 30 to 50 percent battery charged


    Driver Installation

    Flashing phone need to install driver first in order to connect and to be able to flash firmware, we will be install MTK driver in to different way, choose only one by using Auto Installer Drivers or MediaTek USB VCOM drivers. 

    Install Driver using Auto Installer Driver

    • After you download and extract, open the folder and you will see Install.bat 
    • Run and it will appear Windows Security window
    • Click Install this driver software anyway 
    • It will appear many times and just click the same button. 

    MTK Driver Auto Installation

    Wait for CMD window to display Install complete that indicate that driver installation is successful.


    Install Driver Using MediaTek USB VCOM drivers

    To manually install MediaTek USB VCOM drivers, you can follow this video:


    Flashing Stock Rom in SP Flash tool

    1. Download Latest SP Flash tool here and extract to your desired location.
    2. Open the extracted file folder and run flash_tool.exe
    3. On Scatter-loading file, click the choose button to browse for the Android_Scatter.txt
      flash tool choose file

    4. Follow the screenshot below in choosing android scatter file.

      Note: The given screenshot scatter file is for Starmobile UP firmware with MT6582, this may different to your downloaded firmware depend on what model of your phone. this is just a guide on how to flash Mediatek smartphone.

      SP flash tool choose scatter
    5. After you select and load scatter file, either you see unchecked file, if you are not sure what you are doing, I suggest to Do not change anything. In below screenshot, the default CACHE and USRDATA is uncheck, if yours is checked, Just leave it default and do not unchecked.

    6. In flash tool Select Download Only Then click Download button

      In your phone turn off first, or remove battery (if removable) because turn off is a must.
      Then Press Volume up or Down or you can press them both Then insert USB Cable. If you see a Red Progress bar then the phone is detected.
      if it continue to Yellow Progress bar then proceed to step 7.

      • sp flash tool phone detect
        6.1 Some phone that has a Virus infected encounter this warning;
        PMT changed for the ROM; it must be downloaded. If you don’t see this warning skip this and proceed to step 7.
        to solve this, just follow the suggestion, Please Select “Format All + Download” Scene and try again the step 6.

        SP flash tool PMT changed for the ROM
      • You will see a yellow progress bar, that means it start downloading. Just put down your phone because it may take few minutes.

        WARNING: Do not unplug or disconnect during this operation.SP Flash tool Downloading

      • And finally, it will popup a Download OK,  that means the flashing new firmware is successful.

        SP flash tool download ok
        For Video tutorial, you can Watch in YouTube.
        Now that you flash your new firmware, restart your phone and you can now setup settings and install your desired application. if you encounter some problem, please comment and we will help you.
        NOTE: Starting up for the first time may took long.


      Troubleshooting

      FOR INVALID IMEI or Null IMEI

      After you flash new firmware and try to dial *#06# to check your IMEI you will see INVALID or null Just follow How to Fix/Solve Invalid IMEI in safest method.

      FOR BLACK SCREEN/Blue Screen

      Here is the solution for the first two comment below regarding on black screen yet tone is working. TO solve this, follow this simple instruction;
      1. Just flash this additional firmware (19MB) by Team Yunix

      For FRP / Google Account Verification

      Follow the instruction on How to bypass CM Flare J3 Plus FRP

      74 thoughts on “Cherry Mobile Flare J3 Plus Firmware / Stock Rom”

      1. hi i followed your tutorial but when i booted up my phone is all black. i heard the boot music but it's all black. what should i do?

      2. Thanks for the Firmware working well…but I do have a problem in Google Account,How to bypass it,with June 2016 Security Patch…Please Help…

        🙂

      3. For now, Im sorry to say that there is no free tool to remove FRP for Cherry Mobile Flare J3 Plus, Please go to your nearest technician, need inferno box or CM2 box

      4. natry ko na peo wala pa rin..gusto ko sana itry manually using adb fastboot procedure kaso wala akong makitang cwm or twrp na recovery.img pa sa cm flare j3 plus ko.

      5. Sir Ganito po ang lumalabas. Ano po ang gawin?
        nasa step 6 po ako.

        BROM ERROR: S_FT_ENABLE_DRAM_FAIL (4032)
        [EMI] Enable DRAM Failed!
        [HINT]
        Please check your load matches to your target which is to be downloaded.

      6. It means this is not the right firmware for your phone, this firmware is strictly for CM Flare J3 Plus, pm us on facebook.com/gsmsolutionph para matulungan kita

      7. nag message na po ako sa fb page ninyo sir regarding rooting a CM J3 plus. Nagawa ko na po na iflash yung CM J3 plus ko pero hindi pa rin matanggal yung bloatware.

      8. Pa help po boss after mag successfull ung pag flash ng try ko open black screen nalang po pero meron boot sound?? paano po ausin e2

      9. Paano po iflash yung FIX sa black screen kung Black screen lang po ayaw po mag recovery mode.. pano po mai flash sa j3 plus yung fix na yun? THANKS

      10. Hi ask ko lang po kung anung gagawin pag nag aadjust ng kanya ung brightness ng screen? Bago lang ung flare j3 plus q last monday. Then tuesday un na may problema na.. Factory defect b yun Or may ibang solution? Tnx!

      11. salamat ng marami sir GOD bless naayos ko rin si j3 plus ko..salamat talaga sir Master Vir

      12. yung sa girlfriend ko po nag stuck sa "powered by android" tapos hindi siya ma charge. ito naisip kong idea, i flash. pero chacharge ko muna yung batt mismo. kaso lang ang problema kung magcoconect siya sa laptop :3. at may pipintudin pa po ba ako bago ko simulan? kusa kasing nag oopen eh

      13. click mo yung start download sa SP Flash tool, then Remove mo battery then press volume, then insert usb then insert battery. release volume kung detected na ng flash tool

      14. Hi sir.. i need help for my device cm flare j3 plus.. how to connect my device into bootloader what i mean is my device is not detected by sp flash tools.. can u help me to this? advance thanks..

      15. additional problem.. na install ko naman mga needed kaso yung device ko po kapag insert na usb nag connected then disconnect ng paulit ulit po.. paano po ba itro.. sana po matulungan nyo ako..

      16. same lang, click mo yung start download sa SP Flash tool, then Remove mo battery then press volume, then insert usb then insert battery. release volume kung detected na ng flash tool

      17. pre yong sa kaibigan ko namali nya pag flash at na deadboot, try ko flash sa firmware nyo ayaw na mag detect sa pc kahit tanggalin ko paulit2 ang battery habang naka press up button

      18. BROM ERROR: S_FT_ENABLE_DRAM_FAIL (4032)
        [EMI] Enable DRAM Failed!
        [HINT]
        Please check your load matches to your target which is to be downloaded

        pano po ayusin yan plss help me

      19. Is this thread still alive? I just recently have a problem, after flashing the ROM and Black Screen fix and then turning on my phone it just hang on FLARE J3 PLUS logo..
        This problem I encounter was after I used some custom rom. Is there any fix or I should stick forever on that custom ROM?

      20. Working lahat and well explained. Pero hihingi sana ng suggestion sa magandang root methods aside sa mga one-click/tap rooting apps (e.g. Kingroot) kasi di na safe yung mga apps na yun. (pati rin and SuperSU)

      Comments are closed.