Myphone My28s Unlock (Openline) Firmware / Stock Rom

Myphone my28s unlock
Myphone My28s Smart
Here is the Unlock Firmware for your Myphone My28s Smart Lock, to unlock this, you need to flash new Unlock firmware to be able to unlock your Myphone My28s. This is Spreadtrum and it can be flashe through researchdownload with the pac file firmware.

Myphone My28 is different to Myphone My28s

Myphone My28s has a different version, you can see your phone version by going to settings and about and scroll down to Build number.
The common Version is;

Myphone My28s v1.09
Myphone My28s v1.12
Myphone My28s v4.18



Here are the following common problem of Myphone my28s that can be solve through flashing below firmware;
  • Myphone My28s Smart Lock - Most of the my28s bought in smart telecom and to be unlock, need to flash unlock firmware below.
  • Myphone My28s White ScreenThis happen most for my28s v1.12 then flash a lower version. to fix this, need to flash a higher version.
  • Myphone My28s Infected Virus  Also known as Monkey virus where there are automatically popup ads and downloading apps without doing anything. Hard reset won't work.
  • Myphone My28s Bootloop - It happens when we try to install custom rom where we follow incorrect instruction or not compatible rom.


Download Myphone My28s V4.18 Unlock Firmware
Thanks and credit to ==>Team28Devs

Note: above firmware will work to any version of My28s, For My28s DTV Marshmallow firmware

we recommend to perform a back up first to your personal data. to flash above firmware, follow the instruction below.


Flashing Stock Rom To Android Smartphone

Install Spreadtrum Driver

  1. First download SPD SCI Android USB Driver V4 by jungo the complete driver for Spreadtrum.
  2. After download, extract anywhere  in your computer, then select system type if 32-bit or 64-bit.
    - To know your system type, go to control panel click on System and Security then click System. or simply right click on Computer and click Properties. you will see like this. mine is 32 bit (also known as x86-bit).
    System Type 32-bit operating system
  3. After you knew your system type, open your extracted SCI-android-usb-driver-jungo-v4 folder, then choose a folder weather it is x86(32) or x64, then run DPInst.exe. Just click next until it finish installing.
    SCI-android-usb-driver-jungo-v4 driver
NOTE: Before proceeding, make sure that your android smartphone should have atleast 30 to 50 percent of battery to perform flashing.

Flash Pac file Stock Rom

  1.  Download the SPD_Upgrade_Tool_R4.0.0001 latest version, or SPD_Upgrade_Tool_R299015 lower version. Then extract to your desired location.
  2. Open your extracted files and run ResearchDownload.exe, For lower version open Bin folder and run UpgradeDownload.exe.
    NOTE:
    UpgradeDownload and ResearchDownload is the same, UpgradeDownload is just the name of the lower version but they are both SPD Upgrade tool.
    UpgradeDownload.exe
  3. In this instruction I will use UpgradeDownload and a Use Cherry Mobile Pac file as a sample. In UpgradeDownload window, click on single gear icon to Load Packet and browse for pac file(firmware/stock rom) you downloaded then click open. follow this screenshot.
    UpgradeDownload Load Packet
  4. Loading a pac file may took long depend on file size. After loading a pac file, now ready to start flashing, You can also click on Settings on two gear icon if you want to unchecked some part of firmware like EraseRuntimeNV, This will not work on lower version. I recommend that leave it unchanged if you don't have any idea.
    UpgradeDownload Start Downloading
  5.  Turn off first your phone, remove battery (if removable) then bring it back. In ResearchDownload/UpgradeDownload Click on Start Downloading, then in your phone press Volume up and Volume down then connect USB cable. If you see a a progress bar, then it means that it is successfully connected. if not, then try step 5 again.
    UpgradeDownload start
  6. Wait until you see a Passed in progress, that means, you installed a new stock rom successfully.
After you flash the firmware, you can now turn on your phone, take note that first time start up may took long. but if it tooks more than 15 minutes then I suggest to perform a hard reset. you can search a procedure in google.


we encourage you to comment your experience in flashing your phone below :).

102 comments:

  1. master vir nagawa ko naman lahat ng steps. kaso pag icconect ko na ung cp sa laptop may lumalabas na installing drivers tapos hindi sya nagiinstall. pero nainstall ko naman yung naklagay na drivers jan

    ReplyDelete
    Replies
    1. Connect mo sa internet para mainstall, kahit d na mainstall yun magflash padin yan basta na install mo yung given driver above.

      Delete
    2. lumalabas yung charging icon. walang nangyayari, nakahold naman yung vollume +-. tapos connect sa pc. maya maya konti lalabas yung mapa tapos charging icon na

      Delete
    3. Remove mo battery then Insert USB while pressing Volume keys then insert Battery, yan madedetect na yan

      Delete
    4. ano yon tol both keys ba o ung up/down lang?

      Delete
    5. boss hindi mag detec ang phone mo e repair muna ang charging port mo yung sa data

      Delete
  2. Hindi po natapos ang pagdodownload ng system pano po to..

    ReplyDelete
    Replies
    1. try to push all i mean power and volumes up+down

      Delete
  3. sir no signal ung smart pero globe meron

    ReplyDelete
    Replies
    1. Ney bakit ai! :D try mo restart or hard reset gagana yan. make sure gumagana din yung smart na sim mo

      Delete
    2. Master Vir , iba po ba to sa My28s rom v4.18 na madadownload sa Mega ?

      Delete
  4. Replies
    1. Nadulingan mo lang siguro sir :D pero nasa taas sya hehe

      Delete
  5. Sir ang laking tulong nito. Sobrang Thank you po and Godbless.

    ReplyDelete
  6. naka marshmallow po ba yung android version?

    parequest naman po ng marshmallow version.

    ReplyDelete
    Replies
    1. According sa feedback ng firmware na my28s marshmallow, namamatay ang phone after flash, antay antay muna ipopost ko din agad pag may tested na. like facebook.com/gsmsolutionph for update

      Delete
    2. or eto siguro hanap mo, myphone My28s dtv Andrroid 6.0 Marshmallow firmware http://gsmsolutionph.blogspot.com/2017/04/myphone-my28s-dtv-marshmallow-firmware.html

      Delete
  7. sir meron din po ba kayo rom or .pac files po for myphone my81? pa request naman po nag bootloop po my81 ko. dami ko na po nai-try di naman gumagana, yung my 28 ko po kasi naayos ko gamit .pac files nyo po. thanks

    ReplyDelete
    Replies
    1. eto na ang tested stock rom ng mphone my81 android 5.1 lollipop http://gsmsolutionph.blogspot.com/2017/04/myphone-my81-dtv-firmware-stock-rom-pac.html

      Delete
  8. Sir yung myphone my28s ko po na stuck lng sa recovery. Pano po ba yun?

    ReplyDelete
  9. Sir yung myphone my28s ko po na stuck lng sa recovery. Pano po ba yun?

    ReplyDelete
    Replies
    1. iFlash mo lang ng firmware, gayahin lang ang instruction sa taas

      Delete
  10. Boss nag aauto download po yung mga apps sa phone ko. My28s po yung akin. Akala ko walang firmware na pang program nun pero meron pala to. Tanong lang sir. 100% working po ba to? :D Baka kasi mamatay eh. Hahahaha

    ReplyDelete
    Replies
    1. Flash mo lang to para matala mga auto install na yan

      Delete
  11. good evening sir pinagawa ko po yung my phone my28s ko sa farmers kaso po storage space running out po lagi kahit my sd card n po.. pa help nmn po sir

    ReplyDelete
    Replies
    1. After flash hard reset dapat, Hard reset mo lang yan ok na :)

      Delete
    2. ganyan din prob ko. liit kasi ng internal tapos ayaw mabura mga apps naka build in pero rooted naman sya ng kingroot

      Delete
  12. sir d po nareread yung firmware bakit po

    ReplyDelete
  13. Sir, I followed all steps as instructed pero kapag sinasaksak na sa usb, hindi lumalabas yung progress. Any advise?

    ReplyDelete
    Replies
    1. sa installation lang ng driver ang mahirap, make sure installed properly para ma detect ang usb

      Delete
  14. anong android version po ito? 5.1 or 6.0???

    ReplyDelete
  15. wala din po bang mas mabilis na download site?

    bagal ng download, ~5.4KB/s .-.

    ReplyDelete
  16. Maraming Salamat Mister Vir, kakatapos ko lang ma flash. Tanong ko lang kung rooted na ba yung firmware na ito? kung hindi pa, anong method po ba ng rooting ang recommended niyo. Cheers.

    ReplyDelete
  17. Sir. pano to ? yung MYPHONE MY28S ko. pag ka tapos kong mag flash. white screen lang lumalabas. pa help naman po.

    ReplyDelete
  18. sir ayaw madetect yung phone ko kapag isasakna para iflash yung firmware

    ReplyDelete
    Replies
    1. hindi naka install ng maayos driver kung di madetect, check din usb port at cable.

      Delete
  19. Sir ano pong gagawin kapag nag bi.blink ng white yung screen ng my28 ko . help me plss :((

    ReplyDelete
    Replies
    1. Kung my28s yan flash mo gamit ang firmware na galing dito

      Delete
    2. Sir pano kaya gagawin ko . pag dating kase sa Step na turn off phone remove battery press volume up&down . nothing happen . madedelay lang konte yung mag open ng screen ng phone tapos charging na . help sir thanks

      Delete
    3. ganto gawin mo, Una, di click mo na yung Start Downloading, then, naka remove na dapat battery, Press mo volume then plug mo USB then Insert battery. yan sure na madedetect yan

      Delete
  20. Sir, bakit ayaw po ma.install nang jungo..

    ReplyDelete
  21. Sir, bakit ayaw po mainstall ng usb driver?

    ReplyDelete
    Replies
    1. Baka Hindi compatible OS ng pc, try mo nalang ibang PC preferably win7 32bit

      Delete
    2. http://www.mediafire.com/file/obvc4fi0bd7pfj4/Spd+x86+x64+Usb+Driver+Vcom_by%28androidrom.in%29.zip

      proven and tested ko yan!

      Delete
  22. sir ilang mins po natapos ung pag flash ? saking almost 20 mins na waiting paren sa progress .

    ReplyDelete
    Replies
    1. Once na nagstart mag flash may progress bar naman na nagpapakita. try mo lang ulet

      Delete
  23. Thank you so much, Master Vir.

    ReplyDelete
  24. Master Vir. Meron bang stock rom talaga nito. yung hindi pa modified tsaka hindi pa rooted. may bug kasi sa signal eh. TYA

    ReplyDelete
    Replies
    1. Hard reset mo lang bro after hard reset

      Delete
    2. master vir. panu po ba mag hard reset.. tnx po.

      Delete
  25. Master Vir. Anong changelog nito from v2.16?

    ReplyDelete
  26. Working po Thanks a lot po

    ReplyDelete
  27. sir... sa akin pag boot naka lagay reset phone tapos, click ko pumunta sa RECOVERY MOVE ng TWRP pero pag factory reset ko uable to mount naka lagay tapos pag restart ko hanggang Mapa ng pilipinas lang palagi

    ReplyDelete
  28. thank you! :) working skn. :) very easy..

    ReplyDelete
  29. 100% working guys. thanks dito master! <3 god bless you!

    ReplyDelete
  30. sir at first open ba nang cp pagkatapos ma flash ay whitescreen lalabas?? whitescreen kasi sakin eh..

    ReplyDelete
  31. until now white screen parin po sya..

    ReplyDelete
    Replies
    1. sorry bout what happen sa cp mo bro, yes may tendency na magiging white screen cp mo kung maling firmware nagamit mo, flash mo ang firmware galing dito at mafifix na yang whitescreen na yan, kung ganun padin, pm us @ facebook.com/gsmsolutionph

      Delete
  32. Yung nakalagay po sa progress failed:user cancel po. nka ilang beses na akong lipat sa mga port at iba ibang usb cords na po nagamit ko. hindi pa rin matuloy tuloy ang pag dodownload.

    ReplyDelete
    Replies
    1. paki try mo nalang sa windows 7 32 bit na pc, make sure install mo lahat ng driver ng maayos

      Delete
  33. driver unkown pero nainstall kona ung driver properly sa 64 bit at 32 bit pc same lang sa step 5 driver unkown

    ReplyDelete
  34. salamt talaga free na working pa... pero dnio nilagay na ang .ddl ilalagay pasa program files..

    ReplyDelete
    Replies
    1. salamat sa feedback sir, you don't need naman na ilagay sa programfiles bro. eniway at least it works sayo :).

      Delete
  35. Sir bakit po ang tagal sa FDL1.. downloading lang po siyaaa.. tapos di na natapos dun :/

    ReplyDelete
    Replies
    1. paki try ng ibang usb cable or try sa ibang usb port, saka wag po galawin ang pc at cp habang nag flaflash.

      Delete
  36. need kopo help okay lang lahat kaso sa bahay namin smart lang mai signal enough lang text and call perk page dating kodon dnako makatxt and call so smart wala na cgnl rest napo I to several times advice po boss

    ReplyDelete
  37. need kopo help okay lang lahat kaso sa bahay namin smart lang mai signal enough lang text and call pero pag dating kodon dnako makatxt and call so smart wala na cgnl reset napo I to several times advice po boss

    ReplyDelete
  38. if u mean data off naman sia saibang logar okay lang naman sia nag ask lang ako baka my setting kau kasi saiba or be4 makagamit paako nang 2g

    ReplyDelete
  39. sir pwidi pahingi nang ibang baseband yung sa lower versions?? na pwidi mainstall via zip

    ReplyDelete
  40. Helo po. Nagtry po ako mag openline kaso nagfailed kasi unrecognize usb daw tapos ayaw na maopen ng cp tas di na din madetek yung phone ng pc. Any solution po,? Bricked na ba tawag don dead na kasi talaga.

    ReplyDelete
  41. nag bricked po yung CP ko ayaw na po gumana kasi po nacancelled yung Downloading

    ReplyDelete
  42. ako po sir nagkaroon po ako ng white screen sa my28s ko, pwede ko po ba siya i flash kahit hindi rooted?? first time ko po siya ggwen eh

    ReplyDelete
    Replies
    1. pwedeng pwede Download Myphone My28s V4.18 at yun ang flash mo maayos yan

      Delete
  43. master vir.. tanung lng.. panu po ba mag hard reset !??? tnx po...

    ReplyDelete
  44. Bakit yung Akin FDL1 Enumerating Port? Thrn Failed na sir?

    ReplyDelete
  45. di ko mabuksan app sa file manager, pano sya ifix?

    ReplyDelete
  46. Hindi dumala... Tried mga 100 times na Volume UP and DOWN magchacharge lang katapos mag check sa baudrate tapos User Cancel. kung volume UP gamitin ko may process sa FDL1 pero stuck na katapos dun... Any Solution for this? Tried it on R2.9.9015 and R4.0.0001. Same Result Stuck on "Waiting..."

    ReplyDelete
    Replies
    1. Nice try sir, may ganyan talagang mahirap iconnect, back to basic sir, make sure working ang usb cable at installed ang driver. the proper connecting is remove yung batt>click start downloading>press volume>plug usb>insert batt>release pressing pag connected na. kung ganyan ginawa mo then try other pc. sana mapagana :)

      Delete
  47. ayos naman sya kaso yung isang sim slot insert sim hays

    ReplyDelete
  48. Ayos! Tips for Windows 10 users, you need to disable driver signature verification for the drivers to work. you can check out : https://www.howtogeek.com/167723/how-to-disable-driver-signature-verification-on-64-bit-windows-8.1-so-that-you-can-install-unsigned-drivers/

    ReplyDelete
    Replies
    1. I dony know if you are just backlinking but we appreciate your help, thank you!

      Delete
  49. sir d po sya compatible sa win 10 yung jungo usb driver . pahelp po pls d ko po mainstall

    ReplyDelete
  50. yung unit ko my28s na 16gb. nag update lang ng facebook after nun ay na boot loop na, kaya pa ba?

    ReplyDelete
  51. SIr? Pnu poh ung "android is starting" lng lge ts reboot ts pa ulit2x lng.? na hard reset ndin poh pero bumabalik pdin

    ReplyDelete
    Replies
    1. kung ayaw sa hard reset, i Flash mo lang ang firmware sure ok na yan.

      Delete
  52. boss bakit di magamit ng sabay ang sim??yung nka primary lang ang my signal?

    ReplyDelete
  53. Wala akong signal sa 3g? How to fix this?

    ReplyDelete
    Replies
    1. try mo lagay sa sim 1. or baka need unlock

      Delete
  54. sir stuck po sa downloading ng FDL1 ?? any solution?

    ReplyDelete
  55. sir bakit walang signal pagkatapos ko ma flash?

    ReplyDelete