Myphone My28s Unlock (Openline) Firmware / Stock Rom

Myphone my28s unlock
Myphone My28s Smart

Here is the Unlock Firmware for your Myphone My28s Smart Lock, to unlock this, you need to flash new Unlock firmware to be able to unlock your Myphone My28s. This is Spreadtrum and it can be flashe through researchdownload with the pac file firmware.

Myphone My28 is different to Myphone My28s

Myphone My28s has a different version, you can see your phone version by going to settings and about and scroll down to Build number.
The common Version is;

Myphone My28s v1.09
Myphone My28s v1.12
Myphone My28s v4.18



Here are the following common problem of Myphone my28s that can be solve through flashing below firmware;
  • Myphone My28s Smart LockMost of the my28s bought in smart telecom and to be unlock, need to flash unlock firmware below.
  • Myphone My28s White Screen – This happen most for my28s v1.12 then flash a lower version. to fix this, need to flash a higher version.
  • Myphone My28s Infected Virus –  Also known as Monkey virus where there are automatically popup ads and downloading apps without doing anything. Hard reset won’t work.
  • Myphone My28s Bootloop – It happens when we try to install custom rom where we follow incorrect instruction or not compatible rom.

Download Myphone My28s V4.18 Unlock Firmware
Thanks and credit to ==>Team28Devs

Note: above firmware will work to any version of My28s, For My28s DTV Marshmallow firmware

we recommend to perform a back up first to your personal data. to flash above firmware, follow the instruction below.

Flashing Stock Rom To Android Smartphone

Install Spreadtrum Driver

  1. First download SPD SCI Android USB Driver V4 by jungo the complete driver for Spreadtrum.
  2. After download, extract anywhere  in your computer, then select system type if 32-bit or 64-bit.
    – To know your system type, go to control panel click on System and Security then click System. or simply right click on Computer and click Properties. you will see like this. mine is 32 bit (also known as x86-bit).
    System Type 32-bit operating system
  3. After you knew your system type, open your extracted SCI-android-usb-driver-jungo-v4 folder, then choose a folder weather it is x86(32) or x64, then run DPInst.exe. Just click next until it finish installing.
    SCI-android-usb-driver-jungo-v4 driver
NOTE: Before proceeding, make sure that your android smartphone should have atleast 30 to 50 percent of battery to perform flashing.

Flash Pac file Stock Rom

  1.  Download the SPD_Upgrade_Tool_R4.0.0001 latest version, or SPD_Upgrade_Tool_R299015 lower version. Then extract to your desired location.
  2. Open your extracted files and run ResearchDownload.exe, For lower version open Bin folder and run UpgradeDownload.exe.
    NOTE:
    UpgradeDownload and ResearchDownload is the same, UpgradeDownload is just the name of the lower version but they are both SPD Upgrade tool.
    UpgradeDownload.exe
  3. In this instruction I will use UpgradeDownload and a Use Cherry Mobile Pac file as a sample. In UpgradeDownload window, click on single gear icon to Load Packet and browse for pac file(firmware/stock rom) you downloaded then click open. follow this screenshot.
    UpgradeDownload Load Packet

  4. Loading a pac file may took long depend on file size. After loading a pac file, now ready to start flashing, You can also click on Settings on two gear icon if you want to unchecked some part of firmware like EraseRuntimeNV, This will not work on lower version. I recommend that leave it unchanged if you don’t have any idea.
    UpgradeDownload Start Downloading
  5.  Turn off first your phone, remove battery (if removable) then bring it back. In ResearchDownload/UpgradeDownload Click on Start Downloading, then in your phone press Volume up and Volume down then connect USB cable. If you see a a progress bar, then it means that it is successfully connected. if not, then try step 5 again.
    UpgradeDownload start
  6. Wait until you see a Passed in progress, that means, you installed a new stock rom successfully.
After you flash the firmware, you can now turn on your phone, take note that first time start up may took long. but if it tooks more than 15 minutes then I suggest to perform a hard reset. you can search a procedure in google.

we encourage you to comment your experience in flashing your phone below :).

107 thoughts on “Myphone My28s Unlock (Openline) Firmware / Stock Rom”

  1. master vir nagawa ko naman lahat ng steps. kaso pag icconect ko na ung cp sa laptop may lumalabas na installing drivers tapos hindi sya nagiinstall. pero nainstall ko naman yung naklagay na drivers jan

  2. lumalabas yung charging icon. walang nangyayari, nakahold naman yung vollume +-. tapos connect sa pc. maya maya konti lalabas yung mapa tapos charging icon na

  3. sir meron din po ba kayo rom or .pac files po for myphone my81? pa request naman po nag bootloop po my81 ko. dami ko na po nai-try di naman gumagana, yung my 28 ko po kasi naayos ko gamit .pac files nyo po. thanks

  4. According sa feedback ng firmware na my28s marshmallow, namamatay ang phone after flash, antay antay muna ipopost ko din agad pag may tested na. like facebook.com/gsmsolutionph for update

  5. Boss nag aauto download po yung mga apps sa phone ko. My28s po yung akin. Akala ko walang firmware na pang program nun pero meron pala to. Tanong lang sir. 100% working po ba to? 😀 Baka kasi mamatay eh. Hahahaha

  6. good evening sir pinagawa ko po yung my phone my28s ko sa farmers kaso po storage space running out po lagi kahit my sd card n po.. pa help nmn po sir

  7. Sir, I followed all steps as instructed pero kapag sinasaksak na sa usb, hindi lumalabas yung progress. Any advise?

  8. Maraming Salamat Mister Vir, kakatapos ko lang ma flash. Tanong ko lang kung rooted na ba yung firmware na ito? kung hindi pa, anong method po ba ng rooting ang recommended niyo. Cheers.

  9. Sir pano kaya gagawin ko . pag dating kase sa Step na turn off phone remove battery press volume up&down . nothing happen . madedelay lang konte yung mag open ng screen ng phone tapos charging na . help sir thanks

  10. ganto gawin mo, Una, di click mo na yung Start Downloading, then, naka remove na dapat battery, Press mo volume then plug mo USB then Insert battery. yan sure na madedetect yan

  11. Master Vir. Meron bang stock rom talaga nito. yung hindi pa modified tsaka hindi pa rooted. may bug kasi sa signal eh. TYA

  12. sir… sa akin pag boot naka lagay reset phone tapos, click ko pumunta sa RECOVERY MOVE ng TWRP pero pag factory reset ko uable to mount naka lagay tapos pag restart ko hanggang Mapa ng pilipinas lang palagi

  13. sorry bout what happen sa cp mo bro, yes may tendency na magiging white screen cp mo kung maling firmware nagamit mo, flash mo ang firmware galing dito at mafifix na yang whitescreen na yan, kung ganun padin, pm us @ facebook.com/gsmsolutionph

  14. Yung nakalagay po sa progress failed:user cancel po. nka ilang beses na akong lipat sa mga port at iba ibang usb cords na po nagamit ko. hindi pa rin matuloy tuloy ang pag dodownload.

  15. need kopo help okay lang lahat kaso sa bahay namin smart lang mai signal enough lang text and call perk page dating kodon dnako makatxt and call so smart wala na cgnl rest napo I to several times advice po boss

  16. need kopo help okay lang lahat kaso sa bahay namin smart lang mai signal enough lang text and call pero pag dating kodon dnako makatxt and call so smart wala na cgnl reset napo I to several times advice po boss

  17. Helo po. Nagtry po ako mag openline kaso nagfailed kasi unrecognize usb daw tapos ayaw na maopen ng cp tas di na din madetek yung phone ng pc. Any solution po,? Bricked na ba tawag don dead na kasi talaga.

  18. Hindi dumala… Tried mga 100 times na Volume UP and DOWN magchacharge lang katapos mag check sa baudrate tapos User Cancel. kung volume UP gamitin ko may process sa FDL1 pero stuck na katapos dun… Any Solution for this? Tried it on R2.9.9015 and R4.0.0001. Same Result Stuck on "Waiting…"

  19. Nice try sir, may ganyan talagang mahirap iconnect, back to basic sir, make sure working ang usb cable at installed ang driver. the proper connecting is remove yung batt>click start downloading>press volume>plug usb>insert batt>release pressing pag connected na. kung ganyan ginawa mo then try other pc. sana mapagana 🙂

Comments are closed.