Cherry Mobile Flare S5 Mini Firwmare / Stock Rom for white screen

Flare S5 Mini FRP
Cherry Mobile Flare S5 Mini 6.0 Marshmallow
This firmware is another updated firmware just in case you flash the incorrect version of firmware. this is tested solution for white screen after you flash a firmware. this flare s5 mini has a Android 6.0 Marshmallow operating system and spreadtrum chipset that can be flash through Research Download.

NOTE: Flash this firmware when you encounter a white screen after flashing older firmware

Just download the below firmware and follow the flashing instruction below.

Download Cherry Mobile S5 Mini Stock Firmware (Pac File)
Thanks and credit to Hamdanie17


For Invalid IMEI or  Unknown Baseband, Write this NVRAM for CM Flare S5 Mini Using CM2.


Before anything else, we recommend to back up first all your important data like contacts, photos, sms, notes, etc. performing below procedure will erase all your data including third party installed apps. make sure also that your flare s5 mini should charged atleast 20%. Then download the above firmware.



Flashing Stock Rom To Android Smartphone

Install Spreadtrum Driver

  1. First download SPD SCI Android USB Driver V4 by jungo the complete driver for Spreadtrum.
  2. After download, extract anywhere  in your computer, Open extracted SCI-android-usb-driver-jungo-v4 folder then select system type if 32-bit or 64-bit.
    - To know your system type, go to control panel click on System and Security then click System. or simply right click on Computer and click Properties. you will see like this. mine is 32 bit (also known as x86-bit).
    System Type 32-bit operating system
  3. Then run DPInst.exe. Just click next until it finish installing.
    SCI-android-usb-driver-jungo-v4 driver
NOTE: Before proceeding, make sure that your android smartphone should have atleast 30 to 50 percent of battery to perform flashing.

Flash Pac file Stock Rom

  1.  Download the SPD_Upgrade_Tool_R4.0.0001 latest version, or SPD_Upgrade_Tool_R299015 lower version. Then extract to your desired location.
  2. Open your extracted files and run ResearchDownload.exe, For lower version open Bin folder and run UpgradeDownload.exe.
    NOTE:
    UpgradeDownload and ResearchDownload is the same, UpgradeDownload is just the name of the lower version but they are both SPD Upgrade tool.
    UpgradeDownload.exe
  3. In this instruction I will use UpgradeDownload and a Use Cherry Mobile Pac file as a sample. In UpgradeDownload window, click on single gear icon to Load Packet and browse for pac file(firmware/stock rom) you downloaded then click open. follow this screenshot.
    UpgradeDownload Load Packet
  4. Loading a pac file may took long depend on file size. After loading a pac file, now ready to start flashing, You can also click on Settings on two gear icon if you want to unchecked some part of firmware like EraseRuntimeNV, This will not work on lower version. I recommend that leave it unchanged if you don't have any idea.
    UpgradeDownload Start Downloading
  5.  Turn off first your phone, remove battery (if removable) then bring it back. In ResearchDownload/UpgradeDownload Click on Start Downloading, then in your phone press Volume up and Volume down then connect USB cable. If you see a a progress bar, then it means that it is successfully connected. if not, then try step 5 again.
    UpgradeDownload start
  6. Wait until you see a Passed in progress, that means, you installed a new stock rom successfully.
After you flash the firmware, you can now turn on your phone, take note that first time start up may took long. but if it tooks more than 15 minutes then I suggest to perform a hard reset.

56 comments:

  1. nag-install failed po ung wizard ng DPInst.exe. ano po ang gagawin doon?. Thanks po

    ReplyDelete
    Replies
    1. kung di mo mainstall sa pc mo try mo nalang sa ibang pc na windows 7 kahit sa comp shop.

      Delete
    2. Okay po Thank you po. After po iremove yung battery kailangan po bang iopen ulit ung phone at ulagay sa may pipiliin po ung reboot to bootloder po at saka pipindutin ung volume up and down? o hindi na po ioopen tapos volume up and down lang po na sabay? ilan ulit ko na rin po kasi ginawa. di po lumalabas ung sa progress.

      Delete
    3. hindi na dapat magOopen yung bro, pag insert mo ng usb dapat mag flash na sya na hindi magoopen.

      Delete
  2. D po ako mka connect sa computer namin. Ma fefailed po cya, ano po ang gagawin ko? kahit anong gawin ko mag change settings o ano pa bat hindi

    ReplyDelete
    Replies
    1. try mo sa ibang computer then make sure na naka install ng maayos ang driver.

      Delete
  3. Hi Bro, hindi po ma install un (SPD SCI Android USB Driver V4 by jungo) dapat po ba old versions ng windows (xp,vista, 7,8) naka windows 10 na kasi po ako. wala nakong ibang computer. please help. Thanks!

    ReplyDelete
    Replies
    1. Ay yun lang bro, wala kasi akong tested na spd driver pang win10 eh

      Delete
    2. Bro, ayaw ma detect un aking cp sa windows 7. un ibang cellphone na de detect naman kaso saken lang failed un device installation. so ndi pa din ako makaproceed. :(

      Delete
    3. hindi lang naka install ng maayos driver nung sayo bro, make sure conneted s internet kusa din kasi magdodownload driver nyan eh, liban lang kung sira USB Port ng cp mo

      Delete
  4. Di ma Install ung Driver . Pang Windows 7 lng ata yan. im Using Windows 8.1

    ReplyDelete
  5. bat biglang nag Unplugged po ang status.. sakin..

    ReplyDelete
  6. pahelp naman po. kapag po inoopen ko ung cm s5mini. hangang dun sa logo lang sya ng cherry mobile flare s5 mini lang sya tapos di na po siya nagtutuloy. ano po maganda gawin. thanks sa tutulong

    ReplyDelete
    Replies
    1. i Flash mo lang gamit ang firmware dito, follow the above instruction

      Delete
    2. nag ddc ginawa kona lahat kaso pag saksak ng ucs charge lang ok naman usb nag hold na ako ng up and down vol tapos remove and insert bat pero wala

      Delete
  7. Turn off first your phone, remove battery (if removable) then bring it back. In ResearchDownload/UpgradeDownload Click on Start Downloading, then in your phone press Volume up and Volume down then connect USB cable. If you see a a progress bar, then it means that it is successfully connected. if not, then try step 5 again. BOSS ITATANONG KULANG KONG ISASABAY KO PINDUTIN YUNG VOLUME UP AND DOWN? DITO AKO NAHIRAPAN.SALAMAT

    ReplyDelete
    Replies
    1. wag pahirapan sarili bro. press mo muna volume up or down or both volume, then salpak mo USB. Mag kokonek yan kung wala problema sa Driver at USB port.

      Delete
  8. bro na try kuna ok nman yung pag install ko ng driver..at tsaka ok rin yung port bakit UNIDENTIFIED DEVICE.anong problema nyan boss?

    ReplyDelete
  9. Sir walang imei no. Ano pong dapat gawin...
    Wala 2loy signal pag kinabit yung simcard sir..
    Help po thnx

    ReplyDelete
    Replies
    1. Kelangan mo ng CM2 para ma write ng NVRAM yan, I suggest na punta mo nalang sa pinaka malapit na tech bro

      Delete
  10. pagkasaksak ko sa usb sa cms5 lagi nalang nadidiskonek... windows 10 gamit ko... may paraan pa kaya?... ok naman sa ibang unit, nakakapag flash naman ako... kaso si cms5 hindi...

    ReplyDelete
  11. Pwede ko po bang i-apply as update itong stock rom a ito?

    ReplyDelete
  12. Sir pwede po bayan sa cm flare s5 ? puro eror ung gling sa google sir eh deadboot prin siya

    ReplyDelete
    Replies
    1. boss madami kasi klase ng FLARE S5, s5 max, s5 lite at s5 mini

      Delete
  13. nag ddc ginawa kona lahat kaso pag saksak ng ucs charge lang ok naman usb nag hold na ako ng up and down vol tapos remove and insert bat pero wala

    ReplyDelete
    Replies
    1. hehe Chill lang bro, wag init ilo sa cp :D

      Try this,

      turn off your phone, REmove Battery (If Removable) then,
      on SP Flash tool or Research/UpgradeDownload Click Start download.
      On Your Phone, Press Volume up or Down or both,
      Then Insert USB Cable then Insert battery While Pressing Volume.
      Release Volume when SPFlashtool Research/Upgrade Download Detected your phone.

      kung nag on or nag charge, repeat mo lang.

      Delete
  14. Bro. Failed: User cancel. Ayaw ma process. Ginawa ko na lahat. Failed parin bro. Ano dapat gagawin?

    ReplyDelete
    Replies
    1. pag ganun bro may tama Pyesa sa loob yan, pacheck mo nalang sa pinakamalapit na tech natin jan.

      Delete
    2. Master pa-request naman po ng stock rom ni cherry mobile ultra

      Delete
    3. hold up lang..nung una down ginawa ko failed tlga..up lang sby play

      Delete
  15. salamat dito @master vir, okay na ung s5 mini ni 'tumer.. nag-white screen kasi after i-flash gamit ung kay boss moxx, although tried and tested ko ung FW nya..

    ReplyDelete
  16. Master pa-request naman po ng stock rom ni cherry mobile ultra

    ReplyDelete
  17. paki ayos umg mga dl links ayaw ma dl salamat

    ReplyDelete
    Replies
    1. Master pa-request naman po ng stock rom ni cherry mobile ultra

      Delete
    2. CM Ultra is qualcomm chip, since you need it, i will make first and test if its working, Please wait for uploading firmware, abangan ang update sa fb.com/gsmsolutionph

      Delete
  18. Paano po ayusin to yung NV_W "Failed: Write Flash Failed"? Kahit uncheck ko na po at ibypass yung error, bootloop pa rin po kahit passed na.

    ReplyDelete
    Replies
    1. Sa pag insert, check mo usb cable, driver or timing mo pag insert.

      Delete
    2. Okay naman pag insert ko, kasi nag passed siya kapag hindi naka check yung NV_W. Drivers okay din, installed lahat after ko disabled yung driver enforcement signature, okay din cable kasi ginamit ko siya pang flash ng ibang firmware sa ibang phone.

      Delete
    3. PM sa fb.com/gsmsolutionph, send screenshot para kung pwede.

      Delete
  19. kelangan po b connected s internet pg gngwa ung procedure?

    ReplyDelete
  20. boss tested mo na po ba to?

    ReplyDelete
  21. ano po yung password nung pacfile

    ReplyDelete
  22. SP FLASH TOOL po ba gamit mag flash ng cherry mobile flare s5 mini?

    ReplyDelete
  23. Para sa anung version into?? 1.4? 1.3?

    Young iba dyan ng fflash kahit Hindi Alam kung anung version sakanila Maya white screen parn...

    ReplyDelete
  24. "Failed : Write Flash Failed" po ang lumabas pagkatapos..pero finish naman po siya..

    ReplyDelete
  25. tanong lang po sir may s5 mini ako ok naman sya pero once ion ko ang data bigla nagkukusang maclick ung option key ba twag dun paulit ulit un pero pag nag open ako ng khit anong apps ok na pero pagblik ko sa home ganun uli..software po ba prob nun?duda kasi akong touch screen ang prob kasi ok nman sya wag lang talaga i on ang data at pag nsa home lng sya..salamat po kung mapapansin.

    ReplyDelete
    Replies
    1. Dipende yan sir sa history kung pano nagka ganyan, Madalas nga sirang ganyan touchscreen

      Delete
  26. sir kahit po sa marshmallow i flash ito pwede po? flare s5 mini marshmallow 6.0 po sya

    ReplyDelete