Myphone My28s DTV Marshmallow Firmware / Stock Rom

Myphone my28s marshmallow firmware
Myphone My28s DTV Android 6.0 Marshmallow
Here is the latest and tested firmware for your Myphone My28s DTV pac file, with Android 6.0 Marshmallow operating system. flash this stock rom by following the instruction below.

Download Myphone My28s DTV Marshmallow (Pac File)
Password:moxxxgsmsandwich
Thanks and credit to ==>MOXXX TESTED May Times

Solution for Deep sleep as encounter at the comment, Just flash the Myphone My28s 6.0 Firmware by Team YUNIX (Mediafire)(Use only this if you encounter problem using the first firmware by Moxxx) Tested by Marlon



we recommend to perform a back up first to your personal data. to flash above firmware, follow the instruction below.


Flashing Stock Rom To Android Smartphone

Install Spreadtrum Driver

  1. First download SPD SCI Android USB Driver V4 by jungo the complete driver for Spreadtrum.
  2. After download, extract anywhere  in your computer, then select system type if 32-bit or 64-bit.
    - To know your system type, go to control panel click on System and Security then click System. or simply right click on Computer and click Properties. you will see like this. mine is 32 bit (also known as x86-bit).
    System Type 32-bit operating system
  3. After you knew your system type, open your extracted SCI-android-usb-driver-jungo-v4 folder, then choose a folder weather it is x86(32) or x64, then run DPInst.exe. Just click next until it finish installing.
    SCI-android-usb-driver-jungo-v4 driver
NOTE: Before proceeding, make sure that your android smartphone should have atleast 30 to 50 percent of battery to perform flashing.

Flash Pac file Stock Rom

  1.  Download the SPD_Upgrade_Tool_R4.0.0001 latest version, or SPD_Upgrade_Tool_R299015 lower version. Then extract to your desired location.
  2. Open your extracted files and run ResearchDownload.exe, For lower version open Bin folder and run UpgradeDownload.exe.
    NOTE:
    UpgradeDownload and ResearchDownload is the same, UpgradeDownload is just the name of the lower version but they are both SPD Upgrade tool.
    UpgradeDownload.exe
  3. In this instruction I will use UpgradeDownload and a Use Cherry Mobile Pac file as a sample. In UpgradeDownload window, click on single gear icon to Load Packet and browse for pac file(firmware/stock rom) you downloaded then click open. follow this screenshot.
    UpgradeDownload Load Packet
  4. Loading a pac file may took long depend on file size. After loading a pac file, now ready to start flashing, You can also click on Settings on two gear icon if you want to unchecked some part of firmware like EraseRuntimeNV, This will not work on lower version. I recommend that leave it unchanged if you don't have any idea.
    UpgradeDownload Start Downloading
  5.  Turn off first your phone, remove battery (if removable) then bring it back. In ResearchDownload/UpgradeDownload Click on Start Downloading, then in your phone press Volume up and Volume down then connect USB cable. If you see a a progress bar, then it means that it is successfully connected. if not, then try step 5 again.
    UpgradeDownload start
  6. Wait until you see a Passed in progress, that means, you installed a new stock rom successfully.
After you flash the firmware, you can now turn on your phone, take note that first time start up may took long. but if it tooks more than 15 minutes then I suggest to perform a hard reset. you can search a procedure in google.

After flashing and encounter FRP (Asking for google account) then follow the link below
Myphone MY28s FRP Tool Bypass

we encourage you to comment your experience in flashing your phone below :).

39 comments:

  1. gagana po ba ito sa My28s (non DTV version, lollipop version)?

    ReplyDelete
    Replies
    1. Di ko pa naTry bro, pero I think hindi kasi yung My28s is gang lollipop ang official update

      Delete
    2. Pero kaya sa lahat to MY28s na 6.0 Marshmallow kahit hindi dtv?

      Delete
    3. Meron ng 6.0 na MY28s Working din ang firmware na to

      Delete
    4. Peidi po maka hingi nanlink sa my28s??

      Delete
  2. hello pwede ba ang myphone my28s 6.0 marshamallow dito hirap maghanap ng firmware ng 6.0 na my28s

    ReplyDelete
    Replies
    1. myphone my28s 6.0 marshamallow is also a My28s DTV Marsmallow, this firmware is the same :)

      Delete
  3. Thank you for replying but done by master @antgsm.com

    ReplyDelete
  4. Sir, may problem ako sa my28s ko. Kase pag nag deep sleep kase sya, ayaw nya ng mag on. No response sa power button nya.

    ReplyDelete
    Replies
    1. pm us at facebooka.com/gsmsolutionph para assist kita sa pag troubleshoot

      Delete
    2. sir, ganyan din po nangyari sa my28s ko nung maiflash yung firmware po galing dito. .please help sir maayos. .

      Delete
    3. UPDATE UPDATE UPDATE! Meron ng solution sa problema nyo sir, Download nyo lang yung pangalawang firwmare para sa mga no Response after light is off.

      Delete
  5. sir bat gnun nagflash aq ng firmware na yan namamatay matay naman ang cp q ok pa po ba yan firmware na yan?

    ReplyDelete
    Replies
    1. panong namamatay matay? tested naman tong firmware na to sa may28s na marshmallow.

      Delete
    2. tapos q po xa iflash d na set na po lhat pag nakalock na siya mamatay ang ilaw then pag ngtagal ndi na mabuksan sa lock niya un pla ptay na po ..tnx po

      Delete
  6. maraming salamat boss nakakatulong kayo sa ibang tech. keep on sharing boss

    ReplyDelete
  7. nag bblack screen po sya pag nag sleep :( my28s v2

    ReplyDelete
  8. sir pwede pa help sa my28s dtv ko :) kasi may mga apps ako na ayaw mag install pero nag iinstall namn sa ibang phone ko like dun sa ZArchiver at facebook ayaw mag install sa my28s ko yung share it ndi maka connect sa mga phone? e hinde ko namn masyado kuni kutingting kasi baka may magalaw na ndi ko alam ^^' pa tulong po kahit kaunti 6.0 android version nito, god bless po

    ReplyDelete
    Replies
    1. try mo muna hard reset, kung ayaw padin, flash mo na new firmware

      Delete
  9. Sir need help. After nag success di na nag boboot kahit logo. My28s Marshmallow

    ReplyDelete
    Replies
    1. baka yung older version na firmware ang need mo dito http://www.gsmsolutionph.com/2017/01/myphone-my28s-unlock-openline-firmware.html

      Delete
  10. Thanks it 101% working sir :) Thanks a lot! God bless :)

    ReplyDelete
  11. deadboot sakin after maflash gamit firmware nito

    ReplyDelete
    Replies
    1. malamang hindi sakto model ang phone mo bro, madami klase mg my28s.

      Delete
  12. rooted na po ba to and may kasamang custom recovery pag naflash na??

    ReplyDelete
    Replies
    1. Hindi pa pero you can easily root using King Root apk

      Delete
  13. sir tulong naman po na factory reset tong phone ko . eh ngaion dko na mabuksan dahil yung google account na nilagai ko ay nakalimutan kona po. mai ibang paraan pa po kayang pweding gawin sa phone ko para ma update ko ito

    ReplyDelete
    Replies
    1. FRP lock yan, given link na sa baba ng post

      Delete
  14. Sir Patulong Naman . Nainterrupt Po Yung Flashing Ko . Ngayon Po Di Na Sya Bumubukas .

    ReplyDelete
  15. Master pa help po May lumalabas po ng Uart send error sa SPD Flash tool. nag search po ako sa youtube kung pano po i fix yung error pero wala pa din po

    ReplyDelete
  16. sir bakit po naabot na ng 2000 yung time tapos still downloading parin yung status step fdl1 parin?

    ReplyDelete
  17. sir may problema po flash nyo Nag success po flash nya kaso pag tumagal na nagrerestart tapos pag nasa home nagfrereeze tapos nag rereboot ulit.. kpag nagdownload ka din ng apps sa playstore ganun din lumalabas pahelp po

    ReplyDelete