Oppo Joy 3 A11W Firmware / Stock Rom MT6582

Oppo A11W Firmware Stock Rom
Oppo A11W Android OS, v4.4 (KitKat)

Here is the safe way to flash Oppo Joy 3 A11W to avoid dead after flash or vibrate only after flash, download the firmware below and follow the instruction carefully
Here is the safe way to flash your Oppo joy 3
Before flashing new firmware, Lets define first some common problem why we need to flash new firmware. The following are the common problem we encountered.

  • Oppo Joy 3 A11W Infected Virus
  • Oppo Joy 3 A11W  Bootloop
  • Oppo Joy 3 A11W  stuck on logo
  • Oppo Joy 3 A11W  hang or slow responding
  • Oppo Joy 3 A11W unfortunately stopped.

You can flash also when you experience some other software problem. To flash the new firmware, download the stock rom below and follow the instruction carefully.


Here is the Flashing Instruction steps you should follow to avoid any problem.

  1. Download the firmware
  2. Load Scatter file  to SP Flashtool Version 5.15
  3. Check Only Userdata and Android (Check image below)
  4. SP Flash tool Safe flash Oppo A11w black screen

  5. Click Download
If the above Instruction is not clear to you, You can follow Instruction below and in step 5, Follow the screenshot Above. Need More Help? message us!



How to flash Android phone using SP Flash tool

What we need?

  • PC
  • Firmware/ROM, SP Flashtool and MTK Drivers
  • USB Cable
  • Smartphone with 30 to 50 percent battery charged


    Driver Installation

    Flashing phone need to install driver first in order to connect and to be able to flash firmware, we will be install MTK driver in to different way, choose only one by using Auto Installer Drivers or MediaTek USB VCOM drivers. 

    Install Driver using Auto Installer Driver

    • After you download and extract, open the folder and you will see Install.bat 
    • Run and it will appear Windows Security window
    • Click Install this driver software anyway 
    • It will appear many times and just click the same button. 

    MTK Driver Auto Installation

    Wait for CMD window to display Install complete that indicate that driver installation is successful.



    Install Driver Using MediaTek USB VCOM drivers

    To manually install MediaTek USB VCOM drivers, you can follow this video:



    Flashing Stock Rom in SP Flash tool

    1. Download Latest SP Flash tool here and extract to your desired location.
    2. Open the extracted file folder and run flash_tool.exe
    3. On Scatter-loading file, click the choose button to browse for the Android_Scatter.txt
      flash tool choose file

    4. Follow the screenshot below in choosing android scatter file.

      Note: The given screenshot scatter file is for Starmobile UP firmware with MT6582, this may different to your downloaded firmware depend on what model of your phone. this is just a guide on how to flash Mediatek smartphone.

      SP flash tool choose scatter
    5. After you select and load scatter file, either you see unchecked file, if you are not sure what you are doing, I suggest to Do not change anything. In below screenshot, the default CACHE and USRDATA is uncheck, if yours is checked, Just leave it default and do not unchecked.

    6. In flash tool Select Download Only Then click Download button

      In your phone turn off first, or remove battery (if removable) because turn off is a must.
      Then Press Volume up or Down or you can press them both Then insert USB Cable. If you see a Red Progress bar then the phone is detected.
      if it continue to Yellow Progress bar then proceed to step 7.

      • sp flash tool phone detect
        6.1 Some phone that has a Virus infected encounter this warning;
        PMT changed for the ROM; it must be downloaded. If you don’t see this warning skip this and proceed to step 7.
        to solve this, just follow the suggestion, Please Select “Format All + Download” Scene and try again the step 6.

        SP flash tool PMT changed for the ROM

      • You will see a yellow progress bar, that means it start downloading. Just put down your phone because it may take few minutes.

        WARNING: Do not unplug or disconnect during this operation.SP Flash tool Downloading

      • And finally, it will popup a Download OK,  that means the flashing new firmware is successful.

        SP flash tool download ok
        For Video tutorial, you can Watch in YouTube.
        Now that you flash your new firmware, restart your phone and you can now setup settings and install your desired application. if you encounter some problem, please comment and we will help you.
        NOTE: Starting up for the first time may took long.


      Troubleshooting

      FOR INVALID IMEI or Null IMEI

      After you flash new firmware and try to dial *#06# to check your IMEI you will see INVALID or null Just follow How to Fix/Solve Invalid IMEI in safest method.

      31 thoughts on “Oppo Joy 3 A11W Firmware / Stock Rom MT6582”

      1. sorry to inform you guys that once you flash then vibrate only, there are 20% chance to revive it, better to consult your nearest technician or move on and plan to buy new phone.

      2. Hi, my phone Oppo A11w went off and is just vibrating when charging. How can I execute this if my phone is empty? TIA!

      3. Master vir ano tawag dito hangang vibrate lang sya bootloop po ba ito.. i mean software problem bato?? may chance pabang ma revivee ang ganitong problema??

      4. sir anu po ba gagawin q nito kac pag katapuz q ma flash ung Oppo A11w q kac nagstock sya sa logo din pagkatapuz ng flashing eh vibaration nlng sya sir. . anu po gawin q?? salamat

      5. master vir, the same problem din ung sa akin long vibrate and black display after flash, ung sa akin na oppo a11w 8gb ung storage nya,, naging black sya after ma flash ko ng wrong firmware na 4gb… may 8gb firmware ka po ba ng a11w

      Comments are closed.