Myphone MY86 / MY88 DTV Firmware / Stock Rom

Myphone MY86 firmware Stock Rom
Myphone My86 Android 5.1 lollipop

Here is the tested pac file firmware for Myphone MY86 DTV, Tested working. With two version, We also include MY88 DTV.



Why we flash a new firmware for Myphone MY86 DTV? Here are common software problem of android phone that can be fix through flashing new firmware, and remember that flashing can only fixed software problem, this firmware is tested and here are the following software problem that can be fix in flashing new firmware:

  • Myphone MY86 DTV Infected Virus – Also known as Monkey Virus where when you connect to Internet, there is automatically download apps or some popup screen and sometimes automatically turn on WiFi or data connection without doing it. The virus will not remove though hard reset or formatting your phone. Installing new firmware is the best solution.
  • Myphone MY86 DTV Unfortunately Error – This is when you open some apps it will popup Unfortunately, App has stopped. If cannot fixed through clearing the data, then flashing new firmware is also the solution.
  • Myphone MY86 DTV Stuck or Hang in Logo – The reason for this is either when you install incorrect Rom. Try to hard reset first but if still stuck, then flashing firmware is also the solution
  •  Myphone MY86 DTV boot loop.

NOTE: My88 DTV firmware is compatible to My86 DTV

NOTE

There are different version of Myphone MY86 DTV, V1.08, V1.11 And V1.18. Flashing incorrect firmware may cause system failure.

How to know the version of your device?

 Just go to settings>about phone> Build Numer. or simply go to recovery mode.

Download Myphone MY86 DTV Firmware V1.08

Download Myphone MY86 DTV Firmware V1.11 (Thanks Moxx)
Password:
moxxxgsmsandwich

Download Myphone MY86 DTV Firmware V1.18 (For CM2 Only)



Bluescreen / Blackscreen / Whitscreen after flash solution

Just Flash This Firmware For Myphone MY88 DTV

NOTE: My88 DTV firmware is compatible to My86 DTV

Or you can use this firmware back up from from MY88 DTV password is: b3t 

For MyPhone My88 DTV FRP (Verify Google Account) Solution

For resetting Gmail Account or FRP for MY88 DTV, You can follow the same procedure in MY28S You can follow this.

Flashing Stock Rom To Android Smartphone

Install Spreadtrum Driver

  1. First download SPD SCI Android USB Driver V4 by jungo the complete driver for Spreadtrum.
  2. After download, extract anywhere  in your computer, Open extracted SCI-android-usb-driver-jungo-v4 folder then select system type if 32-bit or 64-bit.
    – To know your system type, go to control panel click on System and Security then click System. or simply right click on Computer and click Properties. you will see like this. mine is 32 bit (also known as x86-bit).
    System Type 32-bit operating system
  3. Then run DPInst.exe. Just click next until it finish installing.
    SCI-android-usb-driver-jungo-v4 driver
NOTE: Before proceeding, make sure that your android smartphone should have atleast 30 to 50 percent of battery to perform flashing.


Flash Pac file Stock Rom

  1.  Download the SPD_Upgrade_Tool_R4.0.0001 latest version, or SPD_Upgrade_Tool_R299015 lower version. Then extract to your desired location.
  2. Open your extracted files and run ResearchDownload.exe, For lower version open Bin folder and run UpgradeDownload.exe.
    NOTE:
    UpgradeDownload and ResearchDownload is the same, UpgradeDownload is just the name of the lower version but they are both SPD Upgrade tool.
    UpgradeDownload.exe
  3. In this instruction I will use UpgradeDownload and a Use Cherry Mobile Pac file as a sample. In UpgradeDownload window, click on single gear icon to Load Packet and browse for pac file(firmware/stock rom) you downloaded then click open. follow this screenshot.
    UpgradeDownload Load Packet
  4. Loading a pac file may took long depend on file size. After loading a pac file, now ready to start flashing, You can also click on Settings on two gear icon if you want to unchecked some part of firmware like EraseRuntimeNV, This will not work on lower version. I recommend that leave it unchanged if you don’t have any idea.
    UpgradeDownload Start Downloading
  5.  Turn off first your phone, remove battery (if removable) then bring it back. In ResearchDownload/UpgradeDownload Click on Start Downloading, then in your phone press Volume up and Volume down then connect USB cable. If you see a a progress bar, then it means that it is successfully connected. if not, then try step 5 again.
    UpgradeDownload start


  6. Wait until you see a Passed in progress, that means, you installed a new stock rom successfully.
After you flash the firmware, you can now turn on your phone, take note that first time start up may took long. but if it took more than 15 minutes then I suggest to perform a hard reset.

Bluescreen / Blackscreen / Whitscreen after flash solution

Just Flash This Firmware For Myphone MY88 DTV

NOTE: My88 DTV firmware is compatible to My86 DTV

9 thoughts on “Myphone MY86 / MY88 DTV Firmware / Stock Rom”

  1. CM2 is Chinese Miracle II by infinity box, a Technician tools use to flash firmware, unfortunately its not free, Better to go to ur nearest tech than planning to buy cm2. I recommend to try first other firmware for free.

Comments are closed.