Cherry Mobile Flare J2 DTv TESTED Firmware / Stock Rom

Cherry Mobile Flare J2 DTv stock rom
Cherry Mobile Flare J2 DTv Android Marshmallow 6.0
Here is the tested firmware for your CM Flare J2 DTV, this is tested Pac file firmware for free tool like upgrade download or research download, just follow the instruction below.

Why we flash a new firmware for Cherry Mobile FLare S5 Power? Here are common software problem of android phone that can be fix through flashing new firmware, and remember that flashing can only fixed software problem, this firmware is tested and here are the following software problem that can be fix in flashing new firmware:
  • Cherry Mobile FLare J2 DTV Infected Virus - Also known as Monkey Virus where when you connect to Internet, there is automatically download apps or some popup screen and sometimes automatically turn on WiFi or data connection without doing it. The virus will not remove though hard reset or formatting your phone. Installing new firmware is the best solution.
  • Cherry Mobile FLare J2 DTV Unfortunately Error - This is when you open some apps it will popup Unfortunately, App has stopped. If cannot fixed through clearing the data, then flashing new firmware is also the solution.
  • Cherry Mobile FLare J2 DTV Stuck or Hang in Logo - The reason for this is either when you install incorrect Rom. Try to hard reset first but if still stuck, then flashing firmware is also the solution
  • Cherry Mobile FLare J2 DTV boot loop.

Download Cherry Mobile FLare J2 DTV Firmware

Thanks and credit to MOXXX

Flashing Stock Rom To Android Smartphone

Install Spreadtrum Driver

  1. First download SPD SCI Android USB Driver V4 by jungo the complete driver for Spreadtrum.
  2. After download, extract anywhere  in your computer, Open extracted SCI-android-usb-driver-jungo-v4 folder then select system type if 32-bit or 64-bit.
    - To know your system type, go to control panel click on System and Security then click System. or simply right click on Computer and click Properties. you will see like this. mine is 32 bit (also known as x86-bit).
    System Type 32-bit operating system
  3. Then run DPInst.exe. Just click next until it finish installing.
    SCI-android-usb-driver-jungo-v4 driver
NOTE: Before proceeding, make sure that your android smartphone should have atleast 30 to 50 percent of battery to perform flashing.

Flash Pac file Stock Rom

  1.  Download the SPD_Upgrade_Tool_R4.0.0001 latest version, or SPD_Upgrade_Tool_R299015 lower version. Then extract to your desired location.
  2. Open your extracted files and run ResearchDownload.exe, For lower version open Bin folder and run UpgradeDownload.exe.
    UpgradeDownload and ResearchDownload is the same, UpgradeDownload is just the name of the lower version but they are both SPD Upgrade tool.
  3. In this instruction I will use UpgradeDownload and a Use Cherry Mobile Pac file as a sample. In UpgradeDownload window, click on single gear icon to Load Packet and browse for pac file(firmware/stock rom) you downloaded then click open. follow this screenshot.
    UpgradeDownload Load Packet
  4. Loading a pac file may took long depend on file size. After loading a pac file, now ready to start flashing, You can also click on Settings on two gear icon if you want to unchecked some part of firmware like EraseRuntimeNV, This will not work on lower version. I recommend that leave it unchanged if you don't have any idea.
    UpgradeDownload Start Downloading
  5.  Turn off first your phone, remove battery (if removable) then bring it back. In ResearchDownload/UpgradeDownload Click on Start Downloading, then in your phone press Volume up and Volume down then connect USB cable. If you see a a progress bar, then it means that it is successfully connected. if not, then try step 5 again.
    UpgradeDownload start

  6. Wait until you see a Passed in progress, that means, you installed a new stock rom successfully.
After you flash the firmware, you can now turn on your phone, take note that first time start up may took long. but if it took more than 15 minutes then I suggest to perform a hard reset.

You may also looking for Cherry Mobile Flare J2 DTV bypass google FRP lock


  1. This comment has been removed by the author.

  2. thank you!!!! super helpful to for me.. :)

  3. please help me. im stuck at step 5.. no matter how i do ,, i cant see.. progress bar.

    1. Check your driver if installed or your usb connector.

  4. i'm stuck at the step three. it always says "bin's packet size is too small"

    1. Its means that the firmware may not compatible. Make sure it is exact flare j2 dtv

    2. edi ibg sabihin eto

      hindi compatible?

  5. master Vir after ma flashed kahit passed na ayaw paring mag bukas e

  6. Replies
    1. type manually yung 'moxxxgsmsandwich' extract using 7zip or winrar, sometimes redownloading it will work

  7. master marvin sakin nag automatic lock sya kahit nd ko naman help naman po..thanks

  8. Boss Pano Pagnagstop in the middle of progress..?

    Di Na Madetect ng PC ung PHONE

  9. Help!!! Failed always. Code : Failed user cancel the unplugged. And yunh phone direct LNG sya magcharge

    1. make sure installed ang driver then follow maigi yung step 5

  10. failed: write flash failed lagi po pa help

  11. yes i did it to flash my CM flare J2 DTV
    thanks a lot BRO...
    more power to you...

  12. Mga brod anu ba talaga password nito sa akin error ang tut password

    1. ang password ay moxxxgsmsandwich munually type. extract using winrar or 7zip

  13. Write flash failed sa NV_W na step, ano kaya problema sir?

  14. Tnx po dito maraming slamat master

  15. San ko maddl ung pac file

  16. write flash failed po master

  17. write flash field . paano po ito?